Recording Shot Data Superimposed On The Color Bars - Sony MSW-970 Operation Manual

Proceed as follows:
MENU knob
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the VF SETTING page
appears, and press the MENU knob to select the page
The current setting of each item appears on the right of
the item.
VF SETTING page
U09 VF SETTING
ZEBRA
ZEBRA SELECT
ZEBRA1 DET.LEVEL:
ZEBRA1 APT.LEVEL:
ZEBRA2 DET.LEVEL:
VF DETAIL LEVEL :
VF ASPECT
Item Description
ZEBRA
Turns the zebra display on or off.
ZEBRA SELECT Selects ZEBRA 1, ZEBRA 2 or
BOTH.
ZEBRA 1 DET. LVL Adjusts the level of the zebra 1
(factory setting: 70%) display.
ZEBRA 1 APT. LVL Adjusts the aperture level of the
zebra 1 display (1 to 10 to 20).
ZEBRA 2 DET. LVL Adjusts the level of the zebra 2
(factory setting: 100%) display.
VF DETAIL LEVEL Adjusts the sharpness of the
viewfinder.
Turns the VF detail function on or
off and adjusts the level.
VF ASPECT Selects the viewfinder aspect ratio
(AUTO/16:9).
1) When you use the viewfinder which is not equipped with the ZEBRA
switch, turns the display on or off using this item. When you use the
viewfinder with the ZEBRA switch, the most recent operation of the
ZEBRA switch and this menu operation is effective.
2) The sharpness setting at the viewfinder does not affect the recorded
image.
3) When the VF ASPECT item is set to "AUTO," this is linked to the
16:9/4:3 selection on the FORMAT page.
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
: OFF
: 1
70%
10%
100%
OFF
: AUTO
1)
2)
3)
3
Turn the MENU knob to move the
you want to set, and press the MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to change the setting, and press
the MENU knob.
The z mark returns to a
returns to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
The menu disappears from the screen, and the display
indicating the current status of the camcorder appears
along the top and bottom of the screen.
5-2-6 Recording Shot Data
Superimposed on the Color Bars
In the SHOT DISP page of the USER menu, you can select
which shot data is recorded superimposed on the color
bars. You can also select which of the shot IDs (1 to 4) set
in the SHOT DATA page is recorded superimposed on the
picture.
Proceed as follows:
MENU knob
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the SHOT DISP page
appears, and press the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
Status Display on the Viewfinder Screen
b
mark to the item
b
mark, and the ? mark
CANCEL/PRST/
ESCAPE switch
MENU ON/OFF switch
87