Restriction Of Hazardous Substances (Rohs) Compliance; End-Of-Life / Product Recycling - Intel SC5650-DP Service Manual

If you do not have access to Intel's Web address, please contact your local Intel
representative.
•
Server Chassis: (base chassis is provided with power supply and fans) - UL listed.
•
Server board: you must use an Intel server board - UL recognized.
•
Add-in boards: must have a printed wiring board flammability rating of minimum
UL94V-1. Add-in boards containing external power connectors and/or lithium
batteries must be UL recognized or UL listed. Any add-in board containing modem
telecommunication circuitry must be UL listed. In addition, the modem must have
the appropriate telecommunications, safety, and EMC approvals for the region in
which it is sold.
•
Peripheral Storage Devices: must be a UL recognized or UL listed accessory and
TUV or VDE licensed. Maximum power rating of any one device is 19 watts. Total
server configuration is not to exceed the maximum loading conditions of the power
supply.
Restriction of Hazardous Substances (RoHS)
Compliance
Intel has a system in place to restrict the use of banned substances in accordance with the
European Directive 2002/95/EC. Compliance is based on declaration that materials
banned in the RoHS Directive are either (1) below all applicable substance threshold
limits or (2) an approved/pending RoHS exemption applies.
Note: RoHS implementation details are not fully defined and may change.
Threshold limits and banned substances are noted below.
•
Quantity limit of 0.1% by mass (1000 PPM) for:
— Lead
— Mercury
— Hexavalent Chromium
— Polybrominated Biphenyls Diphenyl Ethers (PBDE)
•
Quantity limit of 0.01% by mass (100 PPM) for:
— Cadmium

End-of-Life / Product Recycling

Product recycling and end-of-life take-back systems and requirements vary by country.
Contact the retailer or distributor of this product for information about product recycling
and / or take-back.
Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide 155