Installing Or Removing A Dvd-Rom Or Cd-Rom Drive; Installing A Dvd-Rom Or Cd-Rom Drive; Figure 36. Removing 5.25-In Drive Emi Shield (Dp/Ws/Brp Configuration Shown) - Intel SC5650-DP Service Manual

11. Plug all peripheral devices and the AC power cable(s) into the server. Power up the
server.

Installing or Removing a DVD-ROM or CD-ROM Drive

Caution: CD-ROM and DVD-ROM drives are NOT hot-swappable. Before removing or replacing
the drive, you must first take the server out of service, turn off all peripheral devices
connected to the system, turn off the system by pressing the power button, and unplug the
AC power cord from the system or wall outlet.

Installing a DVD-ROM or CD-ROM Drive

1. Observe the safety and ESD precautions listed in
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. Remove the front bezel assembly. For instructions, see
Assembly".
5. Remove the EMI shield from the 5.25-in device drive bay (see letter "A" in the
following figure). Move latch to the "unlock" position (see letter "B").

Figure 36. Removing 5.25-in Drive EMI Shield (DP/WS/BRP configuration shown)

®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
B
A
TP01063
Hardware Installations and Upgrades
Appendix A, "Safety
"Removing the Left Side
"Removing the Front Bezel
Information".
Cover".
33