Figure 73. Securing Hot Swap Power Supply Cage To Inside Of Chassis - Intel SC5650-DP Service Manual

Figure 73. Securing Hot Swap Power Supply Cage to Inside of Chassis

13. Route and connect the P1, P2, P3, and P4 cables to the server board. Refer to the
Intel
Intel
14. Route the P5 and P6 cables to the PCI Express* graphic cards.
15. Route the P9 and P10 cables to the 5.25-in. removable media device bays and connect
to installed devices.
16. Route the P11, P12, P13, and P14 cables to the hard drive cage and connect power
cables to installed devices.
17. Reinstall the hot swap power supply module(s). The power supply module(s) clicks
into place when properly seated.
®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
®
Server Board Quick Start User's Guide or User Guide that came with your
®
server board for appropriate power connections.
Hardware Installations and Upgrades
A
AF002934
57