3.2.7 16X2.5" Hot-Swap Sas/Sata Hdd With Combo Pcie* Sff (Nvme) Ssd / Sas Backplane (Ipc Fup8X25S3Hsdk) Cable Guide; Table 18. Combo Backplane Module Placement - 16 X 2.5" Front Drive Configurations - Intel S2600CW Spares/Accessories List And Configuration Manual

Server board/chassis
Hide thumbs Also See for S2600CW:
Table of Contents

Advertisement

3.2.7 16x2.5" Hot-swap SAS/SATA HDD with Combo PCIe* SFF (NVMe) SSD / SAS Backplane (iPC FUP8X25S3HSDK) cable guide

The 8x2.5" combo backplane kit is capable of supporting a combination of both SAS devices and up to four PCIe* SFF (Small Form Factor) (NVMe) SSD drives
All eight drive connectors are capable of supporting a SAS device, but only four include SFF8639 connectors that can support PCIe* SFF (NVMe) SSDs
The PCIe* x16 interface add-in card MUST be installed on a x16 PCIe physical/electrical slot. Refer to the S2600CW Family TPS for more information.
The system is limited to supporting only one combo backplane kit in addition to one or two other backplane options.
Cables for On-Board SATA
Drive Support
Controller to Backplane
Hot-swap
8x2.5"
&
SATA -> BP
Hot-swap
sSATA -> BP
8x2.5" Combo
380mm HD --- HD
SAS / SATA +
(2) AXXCBL380HDHD per cage
PCIe* SSD SFF
The kit includes two cables.
(NVMe)
Use PCIe* cables included with
Cabling options
Combo backplane kit for PCIe*
SSD / NVMe drive support
are the same for
Top and Bottom
Bay
Intel® Server S2600CW Product Family Configuration Guide and Spares/Accessories List
Bottom Drive Cage
Figure 9. SATA/SAS 0-15
Table 18. Combo Backplane Module Placement – 16 x 2.5" front drive configurations
Cables for On-Board SAS
Controller on S2600CW2SR or
S2600CWTSR to Backplane
SAS onboard-> BP
380mm HD --- HD
(2) AXXCBL380HDHD per cage
The kit includes two cables.
Use PCIe* cables included with
Combo backplane kit for PCIe* SSD
/ NVMe drive support
Top Drive Cage
Cables for 12 Gb SAS RAID PCIe*
add-in card to Backplane
SAS Add-in card -> BP
650mm HD --- HD
(2) AXXCBL650HDHD per cage
The kit includes two cables.
Use PCIe* cables included with
Combo backplane kit for PCIe* SSD /
NVMe drive support
24
Cables for 6 Gb SAS RAID PCIe*
add-in card to Backplane
SAS Add-in card -> BP
650mm HD --- MS
(2) AXXCBL650HDMS per cage
The kit includes two cables.
Use PCIe* cables included with
Combo backplane kit for PCIe* SSD /
NVMe drive support

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P4304xxmfen2P4304xxmuxx

Table of Contents