3. Remove the left side cover. For instructions, see
4. Remove the front bezel assembly. For instructions, see
Assembly".
5. Loosen thumb screw and remove the drive cage EMI shield (see letter "A" in the
following figure).
Figure 22. Removing Drive Cage EMI Shield from Chassis (DP/WS/BRP configuration
6. Remove any PCI add-in boards that use the PCI card guide. For instructions, see
"Removing PCI Add-in
®
Intel
Chassis SC5650-DP/WS/BRP/UP Service Guide
shown)
Boards".
Hardware Installations and Upgrades
"Removing the Left Side
"Removing the Front Bezel
A
B
TP01869
Cover".
25