Removing and Installing the Right Side Cover
Warning: This chassis must be operated with the right side cover installed to ensure proper cooling
Removing the Right Side Cover
1. Observe the safety and ESD precautions listed in
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. If it is installed, remove the front bezel assembly. For instructions, see
Front Bezel
5. Remove the two screws (see letter "A" in the following figure") securing the right
side cover to the chassis. Lift the right side cover off the chassis.
Figure 11. Removing Right Side Cover from Chassis
®
Intel
Chassis SC5650-DP/WS/BRP/UP Service Guide
Assembly".
Hardware Installations and Upgrades
Appendix A, "Safety
"Removing the Left Side
A
A
TP01736
Information".
Cover".
"Removing the
15