NOTE: It is recommended that screws be used to secure large devices if shipping chassis
integrated.
Figure 7. Optional Peripheral Devices (DP/WS/BRP configuration shown)
Hard Disk Drives
The server chassis ships with one fixed hard drive cage capable of supporting up to six
cabled 3.5-in x 1-in hard drives. Power requirements for each individual hard drive may
limit the maximum number of drives that can be integrated into the server chassis.
You may purchase an optional hot-swap or SAS/SATA backplane hard drive cage
(capable of handling up to six hot-swappable, SATA or SAS hard drives) to replace the
fixed hard drive cage. See
For instructions on installing hard drives, see
Drive".
®
Intel
Server Chassis SC5650-DP/WS/BRP/UP Service Guide
Table 3
for order code information.
"Installing and Removing a Fixed Hard
Server Chassis Features
9