Figure 86. Inserting Hot Swap Drive Cage Into Chassis (Dp/Ws/Brp Configuration Shown) - Intel SC5650-DP Service Manual

Hot Swap Drive Cage Upgrade Install Instructions (optional)
15. Slide the drive cage into the drive bay slot on the chassis. You should hear a click
when the blue plastic retention mechanism locks into place. Be sure to feed the fan
cable through the slot first so it exits through the back of the drive cage. Connect the
fan cable to its connector on the server board.
Figure 86. Inserting Hot Swap Drive Cage into Chassis (DP/WS/BRP
16. Connect the fan cable to the appropriate connector on the server board. See your
server board documentation for information on the location of the fan cable connector.
70
TP02051
configuration shown)
®
Intel Server Chassis SC5650-DP/WS/BRP/UP Service Guide