Replacing A Hot Swap Power Supply Cage (Brp Configuration Only); Figure 66. Inserting Hot Swap Power Supply Module In Chassis - Intel SC5650-DP Service Manual

Figure 66. Inserting Hot Swap Power Supply Module in Chassis

5. Connect power cable to replaced hot swap power supply.

Replacing a Hot Swap Power Supply Cage (BRP configuration only)

Warning: Hazardous conditions, power supply: Hazardous voltage, current, and energy levels are
present inside the power supply. There are no user-serviceable parts inside it; servicing of
the power supply should be done by technically qualified personnel.
1. Observe the safety and ESD precautions listed in
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. Press up on green latch (see letter "A") while pulling on handle to remove hot swap
power supply module from chassis.
®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
Hardware Installations and Upgrades
Appendix A, "Safety
"Removing the Left Side
Information".
Cover".
53