Checking The Oil Cooler; Installing The Oil Cooler And Radiator - Yamaha XP500 Service Manual

b
a
RADIATOR AND OIL COOLER
EAS00458

CHECKING THE OIL COOLER

1. Check:
2. Check:
EAS00459
INSTALLING THE OIL COOLER AND
RADIATOR
1. Clean:
2. Install:
2
1
NOTE:
• Before installing the oil cooler, lubricate the
• Make sure that the O-ring is positioned prop-
• Align the projection a on the oil cooler with
3. Fill:
6 - 4
• oil cooler
Cracks/damage → Replace.
• oil cooler inlet hose
• oil cooler outlet hose
Cracks/damage/wear → Replace.
• mating surfaces of the oil cooler and the
crankcase
(with a cloth dampened with lacquer thin-
ner)
• O-ring
New
• oil cooler 1
• oil cooler bolt 2
63 Nm (6.3 m · kg, 45 ft · lb)
• oil filter cartridge
17 Nm (1.7 m · kg, 12 ft · lb)
Oil filter wrench
90890-01469
oil cooler bolt with engine oil.
erly.
the slot b in the crankcase.
• cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" in
chapter 3.
• crankcase
(with the specified amount of the recom-
mended engine oil)
Refer to "CHANGING THE ENGINE OIL" in
chapter 3.
COOL