Yamaha XP500 Service Manual page 321

ANTI-LOCK BRAKE SYSTEM (XP500A)
1
9. After releasing the start switch, operate the
brake levers simultaneously.
NOTE:
• A reaction-force pulsating action is gener-
ated in the front brake lever 1 0.5 second
after the rear brake lever and front brake
lever are operated simultaneously and con-
tinues for approximately 1 second.
• Be sure to continue to operate the brake
levers even after the pulsating action has
stopped.
10.After the pulsating action has stopped in
the front brake lever, it is generated in the
rear brake lever 1 0.5 second after and
continues for approximately 1 second.
NOTE:
Be sure to continue to operate the brake levers
even after the pulsating action has stopped.
1
11.After the pulsating action has stopped in
the rear brake lever, it is generated in the
front brake lever 0.5 second after and con-
tinues for approximately 1 second.
CAUTION:
_
• Check that the pulsating action is felt in
the front brake lever, rear brake lever, and
again in the front brake lever, in this
order.
• If the pulsating action is felt in the rear
brake lever before it is felt in the front
brake lever, check that the brake hoses
are connected correctly to the hydraulic
unit.
• If the pulsating action is hardly felt in
either the brake levers, check that the
brake hoses are connected correctly to
the hydraulic unit.
4 - 123
CHAS