Yamaha XP500 Service Manual page 163

CHANGING THE COOLANT
7. Check:
• rubber washer 1
• drain bolt 2
8. Install:
• drain bolt
9. Connect:
• coolant reservoir hose
10.Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
• If coolant splashes in your eyes, thor-
oughly wash them with water and consult
a doctor.
• If coolant splashes on your clothes,
quickly wash it away with water and then
with soap and water.
• If coolant is swallowed, induce vomiting
and get immediate medical attention.
CAUTION:
• Adding water instead of coolant lowers
the antifreeze content of the coolant. If
water is used instead of coolant, check,
and if necessary, correct the antifreeze
concentration of the coolant.
3 - 42
CHK
ADJ
1.6 Nm (0.16 m · kg, 1.2 ft · lb)
Recommended antifreeze
High-quality ethylene glycol
antifreeze containing corrosion
inhibitors for aluminum engines
Mix ratio
50% antifreeze/50% water
Quantity
Total amount
1.5 L
(1.32 Imp qt, 1.59 US qt)
Coolant reservoir capacity
0.35 L
(0.31 Imp qt, 0.37 US qt)