Disassembling The Water Pump - Yamaha XP500 Service Manual

WATER PUMP
EAS00471

DISASSEMBLING THE WATER PUMP

1. Remove:
• water pump seal 1
NOTE:
NOTE:
Remove the water pump seal from the outside
of the water pump housing.
2 Water pump housing
2. Remove:
• oil seal 1
(with a thin, flat-head screwdriver)
NOTE:
NOTE:
Remove the oil seal from the outside of the
water pump housing.
3. Remove:
• bearing 1
NOTE:
NOTE:
Remove the bearing from inside of the water
pump housing.
4. Remove:
• rubber damper holder 1
• rubber damper 2
(from the impeller, with a thin, flat-head
screwdriver)
NOTE:
NOTE:
Do not scratch the impeller shaft.
6 - 12
COOL