Checking The Brake Pads; Checking The Brake Hoses - Yamaha XP500 Service Manual

È
É
È
É

CHECKING THE BRAKE PADS/

CHECKING THE BRAKE HOSES

3 - 48
CHECKING THE BRAKE PADS
The following procedure applies to all of the
brake pads.
1. Operate the brake.
2. Check:
• front brake pad
Wear indicator groove 1 almost disap-
peared → Replace the brake pads as a set.
Refer to "FRONT AND REAR BRAKES" in
chapter 4.
• rear brake pad
Wear indicator 2 almost touch the brake
disc → Replace the brake pads as a set.
Refer to "FRONT AND REAR BRAKES" in
chapter 4.
Brake pad wear limit
0.8 mm (0.03 in)
È Front brake
É Rear brake
EAS00132
CHECKING THE BRAKE HOSES
The following procedure applies to all of the
brake hoses and clamps.
1. Check:
• brake hose
Cracks/damage/wear → Replace.
2. Check:
• brake hose clamp
Loose connection →Tighten.
3. Hold the scooter upright and apply the
brake several times.
4. Check:
• brake hose
Brake fluid leakage → Replace the dam-
aged hose.
Refer to "FRONT AND REAR BRAKES" in
chapter 4.
È Front
É Rear
CHK
ADJ