Checking The Throttle Body Joints And Intake Manifolds; Checking The Fuel Hoses And Fuel Tank Breather Hose - Yamaha XP500 Service Manual

CHECKING THE THROTTLE BODY JOINTS AND INTAKE MANIFOLDS/

CHECKING THE FUEL HOSES AND FUEL TANK BREATHER HOSE/

1
1
CHECKING THE CRANKCASE BREATHER HOSE
2
2
2
CHECKING THE THROTTLE BODY JOINTS
AND INTAKE MANIFOLDS
The following procedure applies to all of the
throttle body joints and intake manifolds.
1. Remove:
• leg shield
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
2. Check:
• throttle body joints 1
• intake manifolds 2
Cracks/damage → Replace.
Refer to "THROTTLE BODY" in chapter 7.
3. Install:
• leg shield
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
EAS00097
CHECKING THE FUEL HOSES AND FUEL
TANK BREATHER HOSE
The following procedure applies to all of the
fuel hoses and fuel tank breather hose.
1. Remove:
• right footrest board
• right upper side cover mole
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
2. Check:
• fuel hose 1
• fuel tank breather hose 2
Cracks/damage → Replace.
3. Install:
• right upper side cover mole
• right footrest board
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
CHECKING THE CRANKCASE BREATHER
HOSE
1. Remove:
• leg shield
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
3 - 37
CHK
ADJ