Yamaha XP500 Service Manual page 213

FRONT WHEEL AND BRAKE DISC
1
3. Tighten:
• front wheel axle 1
Use the damper rod holder 2.
• front wheel axle pinch bolt 3
CAUTION:
Before tightening the wheel axle pinch bolt,
push down hand on the handlebar several
times and check if the front fork rebounds
smoothly.
4. Install:
• front wheel sensor 1
• front wheel sensor lead guide
• front brake caliper 2
2
NOTE:
_
When installing the front wheel sensor, check
the wheel sensor lead for twists and the sensor
electrode for foreign materials.
CAUTION:
_
To route the front wheel sensor lead, refer
to "CABLE ROUTING" in chapter 2.
5. Check:
• front wheel sensor installation
Check if the wheel sensor housing is
installed properly.
Refer to "[D-3] Maintenance of the front
wheel sensor and sensor rotor".
4 - 15
CHAS
59 Nm (5.9 m · kg, 43 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
Damper rod holder (14 mm)
90890-04085
30 Nm (3.0 m · kg, 22 ft · lb)
40 Nm (4.0 m · kg, 29 ft · lb)