3
1
4
2
CHAIN DRIVE
CHECKING THE SWINGARM
1. Check:
• swingarm 1
Damage/wear → Replace.
2. Check:
• pivot shaft 1
• collar
• bearing
• oil seal
Damage/wear → Replace.
CHECKING THE CHAIN DRIVE ASSEMBLY
1. Check:
• primary drive chain 1
• secondary drive chain 2
Damage/stiffness → Replace the drive
chain and its respective gears as a set.
2. Check:
• primary drive gear 3
• primary driven gear 4
• secondary drive gear 5
• secondary driven gear 6
Damage/wear → Replace the respective
drive gears and respective drive chains as a
set.
ASSEMBLING THE CHAIN DRIVE
ASSEMBLY
1. Install:
• chain drive case (outer)
NOTE:
First, tighten the chain drive case bolts that are
numbered in the illustration in the order shown,
and then tighten the unnumbered bolts in a
crisscross pattern.
5 - 91
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)