Yamaha XP500 Service Manual page 36

Tool No.
Digital circuit tester
90890-03174
This tool is used to check electrical sys-
tem.
Fuel pressure adapter
90890-03181
This tool is used to measure fuel pres-
sure.
Valve spring compres- Valve spring compressor
sor
Valve spring compressor attachment
90890-04019
YM-04019
Valve spring compres-
sor attachment
These tools are used to remove or install
90890-04114
the valve assemblies.
YM-04114
Middle driven shaft Middle driven shaft bearing driver
bearing driver
Mechanical seal installer
90890-04058
YM-04058
Mechanical seal
installer
These tools are used to install the water
90890-04078
pump seal.
YM-33221-A
Damper rod holder (14 mm)
90890-04085
This tool is used to loosen or tighten the
front wheel axle.
Clutch holding tool
90890-04086
YM-91042
This tool is needed to hold the clutch
boss when removing or installing the
clutch boss nut.
Valve lapper
90890-04101
This tool is needed to remove and install
the valve lifters.
Valve guide remover (4 mm)
90890-04111
YM-04111
This tool is used to remove or install the
valve guides.
Tool name/Function
1 - 25
SPECIAL TOOLS
GEN
INFO
Illustration