Yamaha XP500 Service Manual page 399

V-BELT AUTOMATIC TRANSMISSION
1
2
2. Install:
• primary fixed sheave 1
• V-belt 2
• secondary sheave assembly 3
CAUTION:
Do not allow grease to contact the V-belt,
primary and secondary pulleys.
NOTE:
• When installing the belt, screw M6 (more
than 45 mm (1.77 in)) bolts 4 to spread
apart the secondary sheave and then install
the belt. Make sure the belt pullout direction
is correct.
• Install the V-belt and secondary sheave
assembly onto the primary sheave side.
• Align the a and b during reassembly.
3. Tighten:
• secondary sheave nut 1
NOTE:
While holding the secondary sheave with the
sheave holder 2, tighten the secondary
sheave nut 1.
4. Install:
• primary sliding sheave 1
• O-rings
1
• spacer
• primary sheave nut 2
2
5 - 68
ENG
90 Nm (9.0 m · kg, 65 ft · lb)
Sheave holder
90890-01481