Digital Projection TITAN 1080p-600 User Manual
  1. Manuals
  2. Brands
  3. Digital Projection Manuals
  4. Projector
  5. TITAN 1080p-600
  6. User manual

Digital Projection TITAN 1080p-600 User Manual

High brightness digital video projector 16:9 widescreen display
Hide thumbs Also See for TITAN 1080p-600:
Table of Contents

Advertisement

Quick Links

TITAN 1080p-600, Reference 1080p,
TITAN 1080p-700, 1080p Ultra Contrast
High Brightness Digital Video Projector
16:9 widescreen display
User Manual
Rev C August 2009
108-451C

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TITAN 1080p-600 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Digital Projection TITAN 1080p-600

Summary of Contents for Digital Projection TITAN 1080p-600

  • Page 1 TITAN 1080p-600, Reference 1080p, TITAN 1080p-700, 1080p Ultra Contrast High Brightness Digital Video Projector 16:9 widescreen display User Manual Rev C August 2009 108-451C...
  • Page 2 Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast...

  • Page 3: Declaration Of Conformity

    Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Declaration of Conformity Directives covered by this Declaration 2004/108/EC Electromagnetic Compatibility Directive. 2006/95/EC Low Voltage Equipment Directive. Products covered by this Declaration Large screen video projector type The CE mark was first applied in:...
  • Page 4 Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast...

  • Page 5: Important Information

    Product revision • Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features without prior notice. Projectors built prior to this revision of the User Manual may therefore not include all the features described.

  • Page 6: General Precautions

    There are no user-serviceable parts inside the lamp module. The whole module should be replaced. Only lamps supplied by Digital Projection and intended for this projector should be used. Fitting any other lamp could damage both projector and lamp, and will invalidate the warranty.

  • Page 7: Installation Precautions

    Digital Projection User Manual Important Information TITAN 1080p-600/700, Reference, Ultra Contrast Installation precautions Notes Connect the LAN cable only to a computer LAN connection. Other similar connectors may have a dangerously high voltage source. The projector must be installed only by suitably qualified personnel, in accordance with local building codes.

  • Page 8: Operation And Configuration Precautions

    Electronic Equipment. Our products are designed with reuse, recycling and recovery of all components in mind. To this end, at end of life, your projector may be returned to Digital Projection Ltd or its agent so that the environmental impact can be minimised.

  • Page 9: Digital Projection Contact Details

    Digital Projection User Manual Important Information TITAN 1080p-600/700, Reference, Ultra Contrast Digital Projection Contact details Notes Digital Projection Limited, Greenside Way, Middleton, Manchester M24 1XX, UK. Registered in England No. 2207264, Registered Office: as above +44 (0) 161 947 3300...
  • Page 10 Important Information Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Page x Rev C August 2009...

  • Page 11: Table Of Contents

    Titan 1080p-600/700, Reference, Ultra Contrast User Manual Contents Declaration of Conformity ........................iii Important Information Symbols used in this guide ........................v ..............................v Warnings ............................v Trademarks Product revision ............................v Manual revision ............................v General precautions ..........................vi Installation precautions ........................vii Operation and configuration precautions ..................viii Compliance with international standards ..................
  • Page 12 Table of Contents Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Mounting the projector ........................2.15 ......................... 2.15 Chassis adjustment ....................... 2.15 Fitting the optional rigging frame Stacking projectors .......................... 2.17 Connecting the projector ........................ 2.18 ..........................2.18 Signal Inputs ......................
  • Page 13 Digital Projection User Manual Table of Contents TITAN 1080p-600/700, Reference, Ultra Contrast ............................... 4.10 Shift ........................4.11 Auto-detect input mode ...........................4.11 Source information ...............................4.11 Input ..........................4.12 Input Presets ........................4.13 Red, Green and Blue ............................ 4.13 Test pattern ..........................4.13 Picture settings ...........................
  • Page 14 Table of Contents Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Colour menu ............................4.29 ........................... 4.30 Colour Mode ........................4.30 Colour Temperature ............................4.30 RGB Lift ............................4.30 RGB Gain ..........................4.30 Component Type ............................... 4.31 Trim Setup menu ............................
  • Page 15 Digital Projection User Manual Table of Contents TITAN 1080p-600/700, Reference, Ultra Contrast Image page ............................5.10 ............................ 5.10 Component ........................... 5.10 Phase slider ..........................5.11 Colour Space ............................5.12 Gamma ..........................5.12 Parametric slider Screen page ............................5.13 ..........................5.13 Blanking On / Off ..........................
  • Page 16 Table of Contents Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Discover page ............................ 5.23 ............................. 5.23 Disconnect ............................5.23 Reconnect ............................5.24 Refresh ............................5.24 Connect 6. Maintenance Changing the lamp module ......................6.2 Changing the air filter ........................6.3 Cleaning ..............................

  • Page 17: Introduction

    1. Introduction Contents What’s in the box? ..........................1.2 Key features of the projector ......................1.3 Getting to know the projector ......................1.4 ......................1.4 Front panel, – lens and power ......................1.4 Rear panel – lamp and air filter ....................

  • Page 18: What's In The Box

    1. Introduction Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast What’s in the box? Notes • Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Lenses are optional. Order lenses from your Digital •...

  • Page 19: Key Features Of The Projector

    Congratulations on your purchase of the Digital Projection Titan 1080p-600/700, Reference or Ultra Contrast projector. Digital Projection International, Texas Instruments’ first DLP™ partner and the original innovator of the 3-chip DLP™ projector, proudly introduces the Titan 1080p. Incredibly bright, high resolution and high in contrast, the Titan 1080p offers a radically new electronics configuration ideally suited for the staging and large-venue permanent installation markets.

  • Page 20: Getting To Know The Projector

    1. Introduction Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Getting to know the projector Notes Front panel, – lens and power For more detailed information Air inlet - about lenses, see around lens section 2. Installation Front Infra-red window...

  • Page 21: Side Panel - Connection And Control

    Digital Projection User Manual 1. Introduction TITAN 1080p-600/700, Reference, Ultra Contrast Side panel – connection and control Notes For information about how to connect the projector, see Connecting the projector in section 2. Installation, and Connections in section 7. Control panel Appendix.
  • Page 22 1. Introduction Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Page 1.6 Rev C August 2009...

  • Page 23: Screen Requirements

    2. Installation Contents Screen requirements ......................... 2.2 ............................2.2 Aspect ratio ......................2.2 Fitting the image to the DMD ....................... 2.2 Images displayed full width ......................2.2 Images displayed full height ........................2.3 Diagonal screen sizes ......................2.4 Fitting the image to the screen ....................

  • Page 24: Screen Requirements

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Screen requirements Notes Aspect ratio The images are shown here scaled automatically by the Fitting the image to the DMD projector. If the source image supplied to the projector is smaller than 1920 x 1080 pixels, then the image will not fill the DMD.

  • Page 25: Diagonal Screen Sizes

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Diagonal screen sizes Notes Screen sizes are sometimes specified by their diagonal size (D) in inches. When dealing with large screens and projection distances at different aspect ratios, it is more convenient to measure screen width (W) and height (H).
  • Page 26 2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Fitting the image to the screen Notes It is important that your screen is of sufficient height and width to display images at all the aspect ratios you are planning to use.

  • Page 27: Positioning The Screen And Projector

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Positioning the screen and projector Notes For optimum viewing, the screen should be a flat surface perpendicular to the floor. The bottom of the screen should be 1.2m (4 feet) above the floor and the front row The projector should be of the audience should not have to look up more than 30°...

  • Page 28: Choosing A Lens

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Choosing a lens Notes A number of lenses are available for use with the projector. Which lens you choose will depend on the screen size, image aspect ratio, projection distance and light The High Brightness lenses output.

  • Page 29: Choosing A Lens Using The Lens Charts

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Choosing a lens using the lens charts Notes Use the charts on this page and on the following pages to choose which lens best suits your application. This chart has a TRF of 1.0, for use with the following images: Full width images, including 2.35:1, 1.85:1 and 16:9 (native resolution)
  • Page 30 2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Lens charts continued Notes Full height image 1.66:1 (Vista) This chart has a TRF of 1.07, Use the chart below to choose which lens best suits your application. for use with the following...
  • Page 31 Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Lens charts continued Notes Full height image 1.6:1 This chart has a TRF of 1.1, for Use the chart below to choose which lens best suits your application. use with the following images: if you need to be more precise, then use the calculations on the page immediately following the lens charts.
  • Page 32 2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Lens charts continued Notes Full height image 4:3 This chart has a TRF of 1.33, Use the chart below to choose which lens best suits your application. for use with the following...

  • Page 33: Choosing A Lens By Calculation

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Choosing a lens by calculation Notes For any screen size not listed above, or if you need to be more precise, then use the calculations below. The Throw ratio for a particular •...

  • Page 34: Useful Lens Calculations

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Useful lens calculations Notes The Throw ratio for a particular The following lens calculations may be useful: lens is fixed, but assumes that the image fills the width of the DMD.

  • Page 35: Fitting The Lens

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Fitting the lens Notes • Turn the lens release lever anti-clockwise so that it is pointing upwards, to open the lock. Each time a new lens is • Remove the rear lens cap from the lens.

  • Page 36: Shifting The Image

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Shifting the image Notes For more information on using The normal position for the projector is at the centre of the screen. However, you the Lens shift feature, see can set the projector above or below the centre, or to one side, and adjust the image section 4.

  • Page 37: Mounting The Projector

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Mounting the projector Notes The projector is designed to be used on a flat surface, but the optional rigging frame BEFORE INSTALLING THE will allow it to be suspended from a lighting truss or rigging. The four adjustable feet...

  • Page 38: Adjusting The Rigging Frame

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Adjusting the rigging frame Notes Coarse adjustment of projector level should be made by adjusting the length of the supporting wires or chains, or by adjusting the position of the truss or rigging.

  • Page 39: Stacking Projectors

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Stacking projectors Notes The rigging frame is capable of supporting the weight of up to two other projectors, using the built-in frame couplings. The projectors can be stacked on top of each other, or suspended below each other.

  • Page 40: Connecting The Projector

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Connecting the projector Notes Input Control connection panel connection panel Signal Inputs The following inputs are available: 3. DVI 4. SDI For more information on 2. RGB2 selecting an input source, see section 4.

  • Page 41: Control Connection Examples

    Digital Projection User Manual 2. Installation TITAN 1080p-600/700, Reference, Ultra Contrast Control connection examples Notes LAN connection All of the projector’s features can be controlled via a LAN connection, using a For more information about pin standard internet browser package such as Internet Explorer.

  • Page 42: Power Connection

    2. Installation Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Power connection Notes When mains power is first applied, the projector will perform a self-test, then go into Standby mode. The Power indicator on the control panel will show amber until the POWER Use only the power cable on the remote control or the keypad, is pressed for 3 seconds.

  • Page 43: Getting Started

    3. Getting Started Contents Switching the projector on ....................... 3.2 Selecting an input or test pattern ....................3.2 ..............................3.2 Input ............................3.2 Test pattern Adjusting the lens ..........................3.3 .............................. 3.3 Focus ............................... 3.3 Zoom ..............................3.3 Shift Adjusting the projected image ......................

  • Page 44: Switching The Projector On

    3. Getting Started Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Switching the projector on Notes • Connect the power cable between the mains supply and the projector. For more information about connecting the power cable, see Power Connections, in section 2.

  • Page 45: Adjusting The Lens

    Digital Projection User Manual 3. Getting Started TITAN 1080p-600/700, Reference, Ultra Contrast Adjusting the lens Notes Focus Each time a new lens is fitted to the projector, the calibration procedure • Press followed by to adjust the focus. must be carried out. See Setup menu, in Section 4.

  • Page 46: Adjusting The Projected Image

    3. Getting Started Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Adjusting the projected image Notes Picture settings • Press a key, followed by to adjust these picture settings: The Saturation control is available for Composite, S- Brightness Video and Component inputs only.

  • Page 47: Overview

    4. Controlling the projector Contents Overview ............................... 4.4 ........................4.4 Controlling the projector ........................4.5 Input modes and settings ........................4.5 Input mode detection ......................4.5 Mode library and mode history ..........................4.6 Input presets Indicators .............................. 4.7 ........................4.7 Input status indicators The control panel ..........................
  • Page 48 4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Input menu ............................4.18 ........................... 4.18 Input Source ............................4.19 Presets ..........................4.19 Recall Presets ..........................4.20 Save Presets ..........................4.21 Delete Presets Picture menu ............................4.22 ............................
  • Page 49 Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast ........................4.33 Control Panel Backlight ........................4.33 Component Video Sync ............................ 4.34 Keystone ........................... 4.34 Lens Calibration ..........................4.34 Calibrate Focus ..........................4.34 Calibrate Zoom ..........................4.35 Test Pattern ........................

  • Page 50: Controlling The Projector

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Overview Notes Controlling the projector The projector can be controlled from: • the remote control • the keypad • the RS232 input • the Ethernet input For more information about controlling the projector using the RS232 and Ethernet inputs, see Remote communications protocol in section 7.

  • Page 51: Input Modes And Settings

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Input modes and settings Notes Input mode detection The projector can automatically detect the following parameters from the incoming video signal: • line frequency • frame rate •...

  • Page 52: Input Presets

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Any subsequent changes that you make to the modal settings will be saved in the Notes mode history, with the input mode. Mode Mode library history NTSC...

  • Page 53: Indicators

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Indicators Notes Input status indicators 1. RGB1 4. SDI 3. DVI There are more indicators on the Control panel, and these are 2. RGB2 described on the next page.

  • Page 54: The Control Panel

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast The control panel Notes Many features are controlled Keypad layout from the menus using the menu navigation keys on the remote The controls on the keypad are identical to those at the top of the remote control, control or keypad.

  • Page 55: The Remote Control

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast The remote control Notes Many features are controlled Layout from the menus using the menu navigation keys on the remote control or keypad. For more information about...

  • Page 56: Using The Control Keys

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Using the control keys Notes Power • Press POWER and hold for 3 seconds, to switch the projector ON. • Press POWER and hold for 3 seconds, to switch the projector OFF.

  • Page 57: Auto-Detect Input Mode

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Auto-detect input mode Notes • Press to force the projector to re-detect the input mode For more information about (see Input modes and settings, earlier in this section).

  • Page 58: Input Presets

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Input Presets Notes recall • To recall a set of modal and lens settings that have been saved, press and hold For more information about input modes and input presets, , whilst pressing the lettered key A –...

  • Page 59: Red, Green And Blue

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Red, Green and Blue Notes • Press to switch the red, green or blue components OFF The red, green and blue keys or ON. are disabled when the OSD is switched OFF.

  • Page 60: Magnify And Pan

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Magnify and pan Notes The magnify feature utilises a • Press Magnify MAGNIFY digital zoom. Used with the pan control, this can be used to: followed by to adjust the size of the picture.

  • Page 61: Using The Menus

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Using the menus Notes Some menu controls can be Navigating menus and submenus accessed directly using the control keys (see earlier in this When the menus are in use and the OSD is ON, the top level menu headings are section).
  • Page 62 4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Notes • Press to open the menu. The blue highlight moves to the first item in the menu, which may be submenu, for example the Projector Setup submenu.

  • Page 63: Menu Controls

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Menu controls Notes Some menus have controls, as shown in the examples below. Some menus items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal.

  • Page 64: Input Menu

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Input menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times. control keys (see earlier in this section).

  • Page 65: Presets

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Input menu continued Notes Presets Some menu controls can be accessed directly using the Sixteen sets of parameters can be saved and recalled (A – S). The parameters...

  • Page 66: Save Presets

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Input menu continued Notes Save presets Some menu controls can be accessed directly using the • Press to select Save Preset. control keys (see earlier in this section).

  • Page 67: Delete Presets

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Input menu continued Notes Delete presets • Press to select Delete Preset. Press to open the Delete Presets A ~ H submenu. Input Menu Presets Delete Presets A ~ H...

  • Page 68: Picture Menu

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Picture menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times. control keys (see earlier in this section).

  • Page 69: Gamma Correction

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast picture menu continued Notes Gamma Correction Video recordings are often supplied with a gamma adjustment applied. The projector’s gamma adjustment can be used to correct for this.

  • Page 70: Aspect Ratio

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast picture menu continued Notes Aspect Ratio • Press to select Aspect Ratio. Aspect Ratio selection can be found in both the Picture and Press to select from: Geometry menus.

  • Page 71: Geometry Menu

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Geometry menu Notes Some menu controls can be accessed directly using the To return to the main menu, press up to three times. control keys (see earlier in this section).

  • Page 72: User Horizontal Aspect Ratio

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Geometry menu continued Notes User Horizontal Aspect Ratio • Press to select User H Aspect. Horizontal and Vertical Aspect Ratio adjustments are Press to adjust the slider (internal number – adjust to fit).

  • Page 73: Resolution

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Geometry menu continued Notes Resolution • Press to select Resolution. Press to open the Resolution submenu. Geometry Menu Resolution Input Detection Input Detection should normally be set to Automatic.

  • Page 74: Blanking

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Geometry menu continued Notes When Input Detection is set to Custom: • Press to select one of the adjustment sliders. Press to adjust the slider to match the resolution of the incoming video signal.

  • Page 75: Colour Menu

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Colour menu Notes To return to the main menu, press up to three times. When using the menus, press to hide or From the main menu: reveal the On-Screen-Display.

  • Page 76: Colour Mode

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Colour menu continued Notes Colour Mode • Press to select Colour Mode. Read the notes on Colour and Press to select from: Global Colourimetry earlier in this section before making...

  • Page 77: Trim

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Colour menu continued Notes Trim • Press to select Trim. The Trim submenu is available only if Global Colour Mode is Press to open the Trim submenu.

  • Page 78: Setup Menu

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu Notes To return to the main menu, press up to three times. From the main menu: • Press until Setup is highlighted. When using the menus, press...

  • Page 79: Projector

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, continued Notes Projector • Press to select Projector. Press to open the Projector submenu. Orientation Setup Menu Projector • Press to select Orientation. Press to select from:...

  • Page 80: Keystone

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, projector continued Notes Keystone Used to correct for distortion caused by the projector being mounted higher or lower than the screen. • Press to select Keystone.

  • Page 81: Test Pattern

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, projector continued Notes Test pattern • Press to select Test Pattern. Press to open the Test Pattern submenu. Setup Menu Test Pattern Press to select from:...

  • Page 82: Global Colourimetry

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu continued Notes Global Colourimetry • Press to select Global Colourimetry. • Press to open the Global Colourimetry submenu. Setup Menu Global Colourimetry Some menu items may be...

  • Page 83: Colour Mode

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Global Colourimetry continued Notes Colour Mode • Press to select Colour Mode. Read the notes on Colour and Press to select from: Global Colourimetry earlier...

  • Page 84: Lamp

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, continued Notes Lamp • Press to select Lamp. Press to open the Lamp submenu. The middle row shows the current lamp setting. Setup Menu Lamp Change Lamp Setting •...

  • Page 85: Lamp Power

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Lamp continued Notes Lamp power • Press to select the Lamp Power setting. Press to adjust the Lamp Power from: 80 to 100% in 1% steps Lamp Mode •...

  • Page 86: On Screen Display

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu continued Notes On Screen Display • Press to select On Screen Display. Press to open the On Screen Display submenu. Setup Menu On Screen Display OSD position •...

  • Page 87: Password

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu continued Notes Password Entry to the password protected area is available to authorised service personel only. • Press to select Password. Press to open the Password control box.

  • Page 88: Communication

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu continued Notes Communication • Press to select Comunication. Press to open the Comunication submenu. Setup Menu Comunication projector Address The projector and the remote control need to be set to matching addresses. Read...

  • Page 89: Network

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu continued Notes Network • Press to select Network. Press to open the Network submenu. Setup Menu Network MAC Address • Projector’s unique ID - for information only - cannot be changed.

  • Page 90: Dhcp

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Network continued Notes DHCp • Press to select DHCP Press to open the DHCP control box. Press to select from: Press to apply the new DHCP setting.

  • Page 91: Subnet Mask

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Network continued Notes Subnet Mask • Press to select Subnet Press to open the Subnet control box. Subnet cannot be changed if DHCP is set to ON.

  • Page 92: Gateway Mask

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Network continued Notes Gateway Mask • Press to select Gateway Press to open the Gateway control box. Gateway cannot be changed if DHCP is set to ON.

  • Page 93: Wifi Channel

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, Network continued Notes Wifi Channel • Press to select Wifi Channel. Press to open the Wifi Channel control box. The Wifi Channel setting is not available if Connection is set to Wired.

  • Page 94: Restore Defaults

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Setup menu, continued Notes Restore Defaults • Press to select Restore Defaults. Press Restore Defaults will restore The following message will be displayed. all settings to factory defaults.

  • Page 95: Information Menu

    Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Information menu Notes To return to the main menu, press up to three times. When using the menus, press to hide or From the main menu: reveal the On-Screen-Display.

  • Page 96: Digital Projection Information

    4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Information menu continued Notes Digital Projection Information • Press to select Digital Projection. When using the menus, press to hide or Press to see the DP Information screen.
  • Page 97 Digital Projection User Manual 4. Controlling the projector TITAN 1080p-600/700, Reference, Ultra Contrast Rev C August 2009 Page 4.51...
  • Page 98 4. Controlling the projector Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Page 4.52 Rev C August 2009...

  • Page 99: Show Page

    5. Userware Contents Introduction ............................5.3 ........................... 5.3 Applet version ............................ 5.3 Disconnect ............................. 5.3 Reconnect ........................... 5.4 Standalone version ............................ 5.4 Disconnect ............................. 5.4 Reconnect Show page ............................5.5 ............................5.5 On / Off ........................5.5 Shutter Open / Closed ...........................
  • Page 100 5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast MCGD page ............................5.14 ....................5.14 The MCGD measurement procedure ..........................5.15 MCGD values ............................5.15 Download ............................5.15 Save File ............................5.15 Open File TCGD page ............................5.16 ..........................

  • Page 101: Userware

    There are two versions of the Userware: the Applet version, stored on the projector software must be installed on and the Standalone version, supplied on disk or from the Digital Projection website. your browser. This software can be downloaded, free of charge Applet version from www.java.com.

  • Page 102: Standalone Version

    Notes • To install the Userware, simply copy the file (from the CD, or downloaded from the Digital Projection website), to a folder on the computer. To use the Titan Userware the • Double click on the filename to start the software.

  • Page 103: Show Page

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Show page Notes The Show page is the first to display when the browser connects to the projector. • To return to the Show page at any time, click on Show.

  • Page 104: Input Presets

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Show page continued Notes Input Presets For more information about recall input modes and input presets, To recall a set of modal settings that have been saved: see Input modes and settings, in section 4.

  • Page 105: Orientation

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Show page continued Notes Orientation • Click on Orientation to select one of the following from the drop down menu: Desktop Front Ceiling Front Desktop Rear Ceiling Rear Input...

  • Page 106: Test Pattern

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Show page continued Notes Test Pattern • Click on Test Pattern to select from the drop down menu: For more information about test patterns, see Setup menu, Test Aspect in section 4.

  • Page 107: Lens Page

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Lens page Notes • To see the Lens page, click on Lens. Lens controls Lens controls • Click on the buttons to Move, Focus and Zoom the lens. •...

  • Page 108: Image Page

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Image page Notes • To see the Image page, click on Image. Component • Click on Component to select one of the following from the drop down menu: The Component selection is...

  • Page 109: Colour Space

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Image page continued Notes Colour Space • Click on Colour Space to select one of the following from the drop down menu: SMPTE240 YPrPb REC709 YPrPb REC601 YPrPb SMPTE240 YCrCb...

  • Page 110: Gamma

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Image page continued Notes Gamma • Click on Gamma Correction to select from the drop down menu: For more information about Gamma, see Picture menu, in section 4. Controlling the Projector.

  • Page 111: Screen Page

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Screen page Notes • To see the Screen page, click on Screen. The blanking curtains will not Blanking On / Off applied until Blanking is turned • Click on Enable to turn the blanking On...

  • Page 112: Mcgd Page

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast MCGD page Notes MCGD - Measured Colour Gamut Data - can be used to correct for a number of environmental variables, for example: Read the notes on MCGD, two or more different projectors...

  • Page 113: Mcgd Values

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast MCGD page continued Notes • To see the MCGD page, click on MCGD . On first entering the MCGD screen, the MCGD values will show those currently loaded into the projector.

  • Page 114: Tcgd Page

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast TCGD page Notes TCGD - Target Colour Gamut Data - can be used to match the display to a pre- defined colour gamut, for example: Read the notes on MCGD,...

  • Page 115: Update Graph

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast TCGD page continued Notes Update Graph • Click on Update Graph to show the effects of the new color gamut graphically. Read the notes on MCGD, TCGD and ColorMAX earlier...

  • Page 116: Global Colour Page

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Global Colour page Notes • To see the Global page, click on Global. The Global page will not be available unless Global is selected in Modal Colour Mode (see next page).

  • Page 117: Modal Colour Page

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Modal Colour page Notes • To see the Modal Colour page, click on Modal. For more information about colour mode, see Colour menu, and Setup menu, in section 4. Controlling the projector.

  • Page 118: Lift And Gain Sliders

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Modal Colour page continued Notes Lift and Gain sliders • Use the sliders to adjust the Lift and Gain for Red, Green and Blue individually. For more information about...

  • Page 119: Information Page

    To see the Information page, click on Info. Projector Information • Click on Projector Information to see the following information about the projector and the Userware: Digital Projection • Click on Digital Projection to see the following contact information: Rev C August 2009 Page 5.21...

  • Page 120: System Page

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast System page Notes • To see the System page, click on System. • Click on OSD to turn the on-screen display On or Off Backlight • Click on Backlight to turn the control panel backlight On...

  • Page 121: Discover Page

    Digital Projection User Manual 5. Userware TITAN 1080p-600/700, Reference, Ultra Contrast Discover page Notes • To see the Discover page, click on Discover. If the projector that launched the Userware is still connected, then its LAN IP address will be listed in the panel and marked Online.

  • Page 122: Refresh

    5. Userware Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Refresh Notes • Click on Refresh to search the network for other projectors. Any projectors previously connected, that are now no longer online, will be marked Unreachable. The Discover page is available only on the Standalone version of the Userware..
  • Page 123 6. Maintenance Contents Changing the lamp module ......................6.2 Changing the air filter ........................6.3 Cleaning ..............................6.4 ............................6.4 Projector ..............................6.4 Lens ........................... 6.4 Lamp module Rev C August 2009 Page 6.1...

  • Page 124: Changing The Lamp Module

    6. Maintenance Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Changing the lamp module Notes • Turn the power OFF and allow the lamp to cool for 5 minutes. Always allow the lamp to cool for 5 minutes before: •...

  • Page 125: Changing The Air Filter

    Digital Projection User Manual 6. Maintenance TITAN 1080p-600/700, Reference, Ultra Contrast Changing the air filter Notes • Turn the power OFF and allow the lamp to cool for 5 minutes. Always allow the lamp to cool for 5 minutes before: • Unscrew the four captive finger screws securing the rear door - the door is tethered, so cannot be removed completely.

  • Page 126: Cleaning

    6. Maintenance Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Cleaning Notes Turn the projector off before cleaning. Projector Never use strong detergents or solvents such as alcohol Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild or thinners to clean the detergent.
  • Page 127 7. Appendix Contents Troubleshooting ..........................7.2 Specifications ............................7.4 ............................ 7.4 Part numbers ............................. 7.4 Optical ............................7.5 Electrical ............................7.5 Physical ............................7.6 Lens Data Dimensions ............................7.8 Input modes supported ........................7.9 Input connections ..........................7.10 ..........................7.10 1.

  • Page 128: Appendix

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Troubleshooting problem possible solutions The projector will not power up. Check that the mains plug is plugged in and that the mains supply is switched on. Check any external fuses or breakers.
  • Page 129 Check that the address setting on the remote control is set either to zero, or to the same as the projector. See section 4. Controlling the projector, Communication menu In the event that this troubleshooting guide has not solved the problem, then contact your Digital Projection dealer or service centre. Rev C August 2009 Page 7.3...

  • Page 130: Specifications

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Specifications Part numbers Projector 1080p-600 107-302 1080p-600 with SDI 108-643 Reference 107-973 Reference with SDI 108-644 1080p-700 108-722 Ultra Contrast 108-781 Rigging frame 107-956 Power cable 10A, Europe 102-163...

  • Page 131: Electrical

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Lamp power 600 and Reference 2 x 300W 700 and Ultra Contrast 2 x 350W Lamp life (typical) 2000 hours in dual lamp mode, 4000 in single lamp mode...

  • Page 132: Lens Data

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Lens Data Optical 105-607 ~ 107-195 105-608 105-609 109-236 ~ 109-359 105-610 ~ 107-196 throw ratio 0.67 : 1 fixed 1.12 : 1 fixed 1.12 : 1 fixed 1.16 - 1.49 :1 zoom 1.39 - 1.87 : 1 zoom full DMD image width 0.67 : 1...
  • Page 133 Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Optical 105-611 ~ 107-197 105-612 ~ 107-198 105-613 ~ 107-199 109-235 ~ 109-358 1.87 - 2.56 : 1 zoom 2.56 - 4.16 : 1 zoom 4.16 - 6.96 : 1 zoom 6.92 - 10.36 : 1 zoom...

  • Page 134: Dimensions

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Dimensions All dimensions in mm unless otherwise stated Page 7.8 Rev C August 2009...

  • Page 135: Input Modes Supported

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Input modes supported RGB colourspace only SDI not present on earlier models Signal Resolution Refresh Total Horizontal Rate number Frequency ( Hz ) of lines (kHz) SDTV 480i 720 x 480 15.73...

  • Page 136: Input Connections

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Input connections Notes 1. RGB1 input 5 x 75 ohm BNC Used for computer, progressive video and analog HD video. RGsB RGBS RGBHV YPrPb To select the sync format for...

  • Page 137: Dvi-D Input

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast 3. DVI-D input Notes 24 way D-type connector TMDS Data 2- pin view of female connector TMDS Data 2+ TMDS Data 2 Shield unused unused DDC Clock DDC Data...

  • Page 138: Sdi Input

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast 4. SDI input Notes 1 x 75 ohm BNC SMPTE 292 / HD-SDI signals are very high speed digital signals which require SDI not present on earlier better quality coaxial cable than conventional analogue video. The data rate is 1.5 models Gigabits per second.

  • Page 139: Control Connections

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Control connections Notes Wired Remote control connection Note that plugging in the remote 3.5mm mini jack Sleeve control cable will disable the infra-red. Power Ring Signal Sleeve Ground Ring...

  • Page 140: Serial Control Input

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Serial control input Notes unused Received Data (RX) The projector is a DTE, so use: Transmitted Data (TX) • a straight cable to connect to a pin view of female connector...

  • Page 141: Remote Communications Protocol

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Remote communications protocol Notes Version: Revision C 02/01/07 Details of how to connect to the projector, using the serial Introduction control input or via a LAN, can This protocol document covers all projectors in the Titan series and also the be found earlier in this section.

  • Page 142: Operation Messages

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Operation Messages Operation messages are constructed using the following format: Header Type Size Oper’n Operation Reserved type 2 bytes 1 byte 2 bytes 2 bytes 1 byte 2 bytes...

  • Page 143: Enhanced Messages

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Enhanced Messages Enhanced messages are constructed using the following format: Header Type Size Data type Data length (n) 2 bytes 1 byte 2 bytes 2 bytes 2 bytes 2 bytes...

  • Page 144: Operation Command Examples

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Operation Command examples Notes All operation commands are located at bytes 9 &10. All values are located at bytes 17 & 18 unless otherwise indicated Spaces in example messages...

  • Page 145: Source (3702)

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Source (3702) Notes projector source select Value Spaces in example messages are for visual clarity and should RGB1 not be sent as part of the message. RGB2 In the example messages the CRC is set to 5858h.

  • Page 146: Brightness (E502)

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Brightness (E502) Notes Adjusts Brightness -128 — +127 (00h - FFh) Range: Spaces in example messages are for visual clarity and should Centre (0): 128 (80h) not be sent as part of the message.

  • Page 147: Contrast (E602)

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Contrast (E602) Notes Adjusts Contrast -128 — +127 (00h - FFh) Range: Spaces in example messages are for visual clarity and should Centre (0): 128 (80h) not be sent as part of the message.

  • Page 148: Shutter (Cf02)

    7. Appendix Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast Shutter (CF02) Notes Closes and opens shutter Target Value Spaces in example messages (Set) (Get) are for visual clarity and should not be sent as part of the Shutter Close message.

  • Page 149: Quick Reference Chart

    Digital Projection User Manual 7. Appendix TITAN 1080p-600/700, Reference, Ultra Contrast Quick Reference chart Rev C August 2009 Page 7.23...
  • Page 150 Digital Projection User Manual TITAN 1080p-600/700, Reference, Ultra Contrast...

This manual is also suitable for:

Titan 1080p-700Titan 1080p ultra contrast

Table of Contents