Mitel 5320 User Manual page 83

78 Using the phone system
The system connects you with the caller who was on hold at the park
location. The LCD screen now displays the caller's name (if known) or
number.
Robin Jones
To cancel the retrieval of the parked call, press the
If you enter a park location where there is no caller on hold, the phone
LCD will briefly display "No Parked Call".
There are nine park locations available (1 through 9). If all park locations
are in use when you try to park a call, the phone LCD will briefly display
"Park Locations Full" and the call will be placed on hold.
If the call is left parked for 30 seconds, the phone of the person who
parked the call will beep and the phone's LCD will briefly display "Call
parked at: " with the park location number to remind you that the call has
not been retrieved.
Speaker on the 5212/5312 IP phone
Using Speaker, you can turn the speakerphone on your phone on and off. To
use Speaker, press the
Transfer call on the 5212/5312 IP phone
Using Transfer, you can transfer a call from one phone to another. To transfer
a call, follow these steps:
1 While on an active call, press the
call on hold, and the LCD screen displays:
Transfer To:
2
Enter the extension or phone number of the person to whom you wish to
transfer, or press a One-Touch Speed Dial button.
Transfer To: 415
3 Press the
the message "Transfer Complete" for approximately five seconds before
returning to an idle state.
key.
key. The system places the
key once you hear ringing. The LCD screen displays
key.
Final