Configure Dial-0 Destination - Mitel 5320 User Manual

146 Personalizing phone usage via the web
"Voice mail on 5212/5312 IP phone"
5324 phone" on page 57,
phone" on page 30 and
4
Fill in the email address to which you want the voice message sent.
5 Select the Save button to save the information.
If you configure your voice mails to be emailed and deleted from the voice
mail system, then you must also disable the Message Waiting Indicator.
See "Enable Message Waiting Indicator"
To configure the system so that it does not send you an email containing the
voice message when it is deposited in your voice mailbox, follow these steps:
1
Select My Voice Mail in the left menu.
2
In the Receiving Voice Mail section, uncheck the box for Send a copy of
the Voice Mail as an email attachment to this email address.
3
Select the Save button to save the information.

Configure dial-0 destination

To configure the system so that callers to your voice mailbox can press "0" to
be redirected to a specific number, follow these steps:
1
Select My Voice Mail in the left menu.
2 In the Dial-0 destination section, check the box for Enable dial-0
option.
3 Select one of the following:
• The default configured by my administrator
• My Co-worker, and select a Co-worker from the drop-down list
• Call Group, and select a Call Group from the drop-down list.
• Auto Attendant, and select an Auto Attendant from the drop-down
list
4 Select the Save button to save the information.
To configure the system so that callers to your voice mailbox cannot press "0"
to be redirected, follow these steps:
1 Select My Voice Mail in the left menu.
2
In the Dial-0 destination section, uncheck the box for Enable dial-0
option.
3
Select the Save button to save the information.
on page 80,
"Voice mail on the 5320/5330/5340/5260
"Voice mail on the 5304 phone"
on page 144.
"Voice mail on the 5224/
on page 104.
Final