Mitel 5320 User Manual page 47

42 Using the phone system
If the call was answered by a member of your call pickup group, then the
call will show as unanswered (with a *) on your phone and answered
(without a *) on the call pickup group member's phone that answered the
call.
*CALLS means that there has been at least one unanswered call since
the last time you viewed the list of calls you received.
Redial on the 5224/5324 phone
Using Redial you can view a list of calls that were made and also redial a
number in that list without using the keypad. The maximum amount of
numbers in your redial list is typically ten but is dependent on your service
provider.
To use Redial, follow these steps:
1
Press the REDIAL softkey on your phone, or press
The number that you most recently dialed is displayed.
*1: 9-605-223-7865
DIAL TIME
2
Use the keys to navigate the list (if required).
3
Press the TIME softkey if you wish to display the time and date of the call.
4 Press the NUMBER softkey if you wish to display the number dialed.
5
Once the required number is displayed, press the DIAL softkey to make
the call. The next available Line Appearance is selected and you will hear
ringing once the number has been dialed.
The * symbol beside the position number means that the call was not
answered.
The position of the call in the call list is displayed in front of the phone
number.
Press the QUIT softkey to exit from the call list or press
Call pickup on the 5224/5324 phone
Using the call pickup feature, you can answer incoming calls for other
members of your call pickup group.
To use this feature, you must be a member of a call pickup group and have a
memory key programmed as Pickup.
When a call comes into any member of your call pickup group, their phone will
ring and your Pickup key will flash. To answer the call, follow these steps:
QUIT
.
.
Final