Mitel 5320 User Manual page 59

54 Using the phone system
3
Speak into the handset or the speakerphone.
4
To end the page, you have the following options:
• Replace the handset if using the handset.
• Select the key.
• Select the END softkey.
A page is not broadcast on phones that are busy.
If you select Page while there is already a page in progress, the system
waits until the page in progress is completed before your page is started.
Your phone displays "Calling: Site Page" and you hear ringing while you
are waiting.
On the phones receiving a page, the phone LCD screen displays the
name of the user who originated the page and an END softkey. The user
receiving the page can stop the page to their phone by selecting the END
softkey.
Page from: Karen Gr
Park and retrieve on the 5224/5324 phone
Using Park and Retrieve, you can put a call on hold at a park location so that
it can be retrieved from any other phone at your business. To use this feature,
a memory key must be programmed as a Park/Retrieve key
To put a call on hold at a park location, follow this step:
1
While on an active call, select a memory key programmed with the Park/
Retrieve feature. The system places the call on hold at a park location.
The park location is displayed on your phone LCD.
Parked at: 4
You are no longer connected with the caller and your phone returns to the
idle state.
To retrieve a parked call, follow these steps:
1 From an idle phone, lift the handset. This will select the next available
Line Appearance. Select a memory key programmed with the Park/
Retrieve feature. The phone LCD screen displays:
Park Location:
2
Enter the required park location using the phone keypad.
END
END
QUIT
Final