Mitel 5320 User Manual page 38

:
:
Final
Activating a 5224/5324 phone
To activate a Mitel phone you need (1) an extension number, (2) a phone, and
(3) a PIN. Your administrator can provide you with an extension number and
initial PIN.
To activate your phone, follow these steps:
1
Disconnect your computer from the network.
2
Plug the phone into the network.
3
Plug the computer into the phone at the port marked PC.
4
Connect one end of the phone power pack into your phone and the other
end into a power outlet.
Note: If your network is configured with Power Over Ethernet (POE), the
above step is not necessary.
5
Wait for the phone to display the following (this may take 30 seconds or
more):
Logged Out
ACTIVATE
6
Press the ACTIVATE softkey.
The display will show:
Extension:
7 Enter your extension.
8
If you have login/logout privileges, the display will show:
PIN:
ENTER
Enter your PIN, then press the ENTER softkey.
9 If you do not have login/logout privileges, the display will show
Extension: 314
YES NO
Press the YES softkey.
10 The display will show
Extension: 314
REDIAL CALLS
You have now successfully activated the phone, and can make calls.
QUIT
QUIT
MENU
Using the phone system 33