Mitel 5320 User Manual page 46

Final
To view the list of incoming calls received, follow these steps:
1 Press the CALLS softkey on your phone. If you have programmed one of
your programmable keys as Incoming Calls List, you can press this key
instead.
The most recent call that you received is displayed.
1: John Doe
DIAL TIME
If the name of the caller is not known, the number will be displayed.
2 Use the keys to navigate the list.
3
Press the TIME softkey if you wish to display time and date of the call.
4
Press the NUMBER softkey if you wish to display the number of the caller.
5
Press the NAME softkey if you wish to display the name of the caller
again. If the name is not known, this option is not available.
6
Press the QUIT softkey to exit from the call list.
To call a number from your incoming calls list, follow these steps (only
available if dialing from the incoming call list is supported by your Service
Provider):
1
Press the CALLS softkey on your phone (or the Incoming Calls List
programmed key).
The most recent call that you received is displayed.
1: John Doe
DIAL TIME
2
Use the keys to navigate the list.
3
Press the DIAL softkey to make a call to the displayed number.
The next available Line Appearance is selected and the system will
attempt to dial the displayed number by prefixing it with the appropriate
digits for external dialing (usually "9" or "91" depending on configuration).
If the number can be dialed as such, you will hear ringing once the call
has been placed. If the number cannot be dialed as such, the call will fail
and you will have to dial the number manually, including the proper prefix
digits
The position of the call in the call list is displayed in front of the phone
number.
The * symbol beside the position of the call means that the call was not
answered.
QUIT
QUIT
Using the phone system 41