Mitel 5320 User Manual page 55

.
.
50 Using the phone system
If you log in while you are logged in to another phone, the system will log
you out of the original phone.
You cannot log in or out, or activate a phone, while the phone is on an
active call.
If you are not logged into a phone, all calls to your extension go directly to
call coverage.
If you have not been assigned the privileges required to log out of your
phone, you are not prompted for a PIN when you log in.
You are not prompted for a PIN when you log in to a phone with a location
extension.
Logout from the 5224/5324 phone
To log out of a phone, follow these steps when your phone has no calls
connected. At the start, the display should display the following:
Extension: 314
REDIAL CALLS
1 Press the MENU softkey.
MENU
LOGOUT DIR
2
Press the LOGOUT softkey
The LCD displays a confirmation message.
Confirm Logout
YES
3
Press the YES softkey to proceed. The LCD will display the message
"Logout successful", confirming that you are logged out of the phone and
the system. Incoming calls will be forwarded to Call Coverage. The
display will return to a logged out/unassigned idle state
Logout Successful
Logged Out
ACTIVATE
If your phone has been locked you cannot log out of the phone. The
LOGOUT softkey will not be displayed on your phone. Contact your
system administrator for assistance.
You cannot log in or out, or activate a phone, while the phone is on an
active call.
You can press the
After you have logged out of the phone, callers to your extension will be
directed to your call coverage target. If no call coverage target is set, the
phone will ring until the caller hangs up.
If the primary member of a Monitor Group logs out of the phone, calls to
MENU
QUIT
NO
key instead of the QUIT softkey.
Final