Mitel 5320 User Manual page 52

Final
instructions on how to view your call permissions.
If you have this feature turned on when you log out of your phone all your
calls will be forwarded to the defined prompt.
Handsfree answerback on the 5224/5324 phone
Using Handsfree answerback, you can have intercom calls automatically
answered so that you have a two-way speech connection. See
Calls on the 5224/5324 phone"
Press the Handsfree answerback key to turn the feature on. Press the key a
second time to turn the feature off. The LED on the programmed key indicates
when the Handsfree answerback feature is turned on.
To be able to activate and deactivate this feature with a key, you must have a
key programmed with Handsfree answerback.
You can also enable the feature without a key by checking the box for
Handsfree answerback on your Personal Details page. See
on page 118.
Hold on the 5224/5324 phone
Using Hold, you can put an active call on hold, and make other calls. The Line
Appearance key will flash to indicate the call is on hold.
To place a call on hold, follow these steps:
1
While on an active call, press the
2 The indicator light next to the active Line Appearance changes from
green to red and flashes slowly.
3
To remove the call from hold, press the Line Appearance key.
Intercom Calls on the 5224/5324 phone
Intercom to co-worker on the 5224/5324 phone
Using Intercom to Co-worker, you can make a page to a selected co-worker
that is broadcast through the speaker on your co-worker's phone. Pick up the
handset or select a Line Appearance key, then press the Intercom to Co-
worker key to start the page to your co-worker. If you press the Intercom to
Co-worker key with no line active, the next available line appearance key will
automatically be selected. Note that if your phone is active on a call or in a
ringing state, you must select an available line appearance key before
pressing the Intercom to Co-worker key.
on page 47.
key.
Using the phone system 47
"Intercom
"Forgotten PIN"