Dynamic Site - Mitel 5320 User Manual

Dynamic site

142 Personalizing phone usage via the web
2
Select the Print List button to display a printable version of the directory.
3
Select Print button in the browser window.
4
Return to the directory by selecting the Close Window button.
The Dynamic Site Support feature allows telephone users to create their own
dynamic site from any location with an IP connection to the service provider.
The service provider can provision this capability for any telephone user. Your
company administrator cannot provision this capability.
If this capability is enabled, you will be presented with an extra web page -
"My Dynamic Site" on the web interface. By logging in to the web interface
and selecting this new page, you will then be presented with the option to
create a dynamic site or to release one. This capability requires that you have
a specially configured phone provided by your service provider.
When you select the button to create a dynamic site, the system automatically
detects the router to which your computer is connected and then provisions a
site using that router address. You then re-boot your phone (disconnect and
reconnect the power). It will obtain an IP address locally and then register with
the phone service using the newly created dynamic site. The site persists as
long as you are connected. If your phone is disconnected, the site will persist
for a certain amount of time (typically 1 hour after the phone is disconnected
and a minimum of 2 hours after the site was created).
When you select the button to release a dynamic site, the system deletes that
site and logs out any user logged in at that site.
For information purposes, the "My Dynamic Site" page displays the IP
address of your computer. It also displays the IP address of your dynamic site
(the router address) if you have created one.
The following screen shows the controls and information displayed on the My
Dynamic Site page:
Final