Mitel 5320 User Manual page 73

68 Using the phone system
The number that you most recently dialed is displayed:
*1: 9-605-223-7865
2
Use the Arrow keys to navigate the list (if required).
3 Once the required number is displayed, press the
the call. The next available Line Appearance is selected and you will hear
ringing once the number has been dialed.
* means that the call was not answered. The position of the call in the call
list is displayed in front of the phone number. Press the
exit from the call list.
Call pickup on the 5212/5312 phone
Using the call pickup feature, you can answer incoming calls for other
members of your call pickup group.
To use this feature, you must be a member of a call pickup group and have a
memory key programmed as Pickup.
When a call comes into any member of your call pickup group, their phone will
ring and your Pickup key will flash. To answer the call, follow these steps:
1 Lift the handset.
2
Press the Pickup key.
or
1
Press the Pickup key to answer the call in speaker mode.
You can also join and leave your pickup group with a Join/Leave group key or
via the web interface. When you leave the group, this disables other group
members from picking up your calls; however, you can still pickup other
members' calls. See "Join/Leave group on the 5212/5312 IP phone"
page 73 and "Join/leave call groups"
You cannot pick up calls to a member of your call pickup group if the call
does not result in the member phone ringing. For example, if the called
member is either logged out or has no available Line Appearances, then
you cannot pick up the call.
on page 137.
key to make
key to
on
Final