Mitel 5320 User Manual page 45

40 Using the phone system
1
Select the Account Code key. The LCD briefly displays the account code
that has been pre-programmed:
Account Code: 45678
2 The next available line appearance is selected, dial tone is heard and
your phone LCD updates.
REDIAL CALLS
3
Proceed with making your call.
To enter a pre-programmed account code during a call, follow these steps:
• Select the Account Code key. The LCD briefly displays the account code
that has been pre-programmed:
Account Code: 45678
You can re-enter an account code for a call multiple times. The last
account code entered is the account code that will be assigned to the call.
To cancel account code entry before the call is placed, replace the
handset (or, if using the speakerphone, press the
code speed entry during a call cannot be cancelled.
If the pre-programmed account code has an invalid length, the phone LCD
briefly displays "Invalid Account Code". Contact your system administrator to
determine the valid account code length for your business.
You cannot assign an account code to a call after it has been completed.
Call lists on the 5224/5324 phone
Call list on the 5224/5324 phone
Call list keeps a list of the calls that you make and receive. The call list is
accessible from your phone. You can redial any calls that you made from the
call list. See "Redial on the 5224/5324 phone"
to dial a number from your incoming call list if it is supported by your service
provider.
DIR
on page 42. You may be able
key. Account
Final