Mitel 5320 User Manual page 54

Final
• Key is flashing green with a ring tone – an incoming call is available to be
answered.
• Key is flashing red without a ring tone – a call is on hold.
• Key is solid – If this is green, then a call is active. If this is red, then a
twinned call is active on the twinned target phone.
When you have multiple Line Appearance keys, they are ordered from bottom
to top, right to left. An incoming call will appear on the first available Line
Appearance key.
Your phone will normally have two or three pre-programmed Line
Appearances. To be able to handle more simultaneous calls, you must
program additional keys with Line Appearance.
Login on the 5224/5324 phone
Using Login, you can enter your extension into any phone and take ownership
of the phone. By doing this, you can direct all incoming calls for your
extension to that phone. You must have the appropriate privileges to be able
to log out of a phone.
You can only log in to an unassigned phone (a phone without a user logged
in). If a phone has a user logged in, you can log the user out by following
procedure in "Logout from the 5224/5324 phone"
phone shows the following on its display:
Logged Out
ACTIVATE
To log in to a phone, follow these steps:
1
Press the ACTIVATE softkey on an unassigned phone (a phone without a
user logged in).
Extension:
2 Enter your extension.
Extension: 314
PIN:
ENTER
3
Enter your PIN.
PIN: *****
ENTER
4 Press the # key or the ENTER softkey once you have finished entering
your PIN.
The system verifies that the PIN is valid and then it logs you into the
phone.
Extension: 314
REDIAL CALLS MENU
on page 50. An unassigned
QUIT
QUIT
QUIT
QUIT
Using the phone system 49