Securitytec DS-8004HCI-S User Manual page 99

Alarm relay output setup:
1. In the ―Alarms‖ menu, use the [↑] [↓] keys to select an alarm output.
2. Select delay time: This feature selects the amount of time the alarm triggers
remain after the alarm clears. The post alarm option times are: 5 Seconds, 10
Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5 Minutes, 10 Minutes and Manual
Stop. If you select the ―Manual' option, the alarm output will not stop until you
select the ―Clear Alarm‖ button in ―Utilities‖ menu. So the actual alarm output time
is made up of alarm input time and this delay time.
3. Enter the alarm out schedule: You can schedule the times of day that the alarm
outputs are active. Move ―Active Frame‖ to ―Schedule‖ button on right side of
―Alarm Out Time‖ item, press [ENTER] to access the corresponding schedule
menu:
4. Setup alarm out schedule: Like other schedule setup, you can set 4 time periods
for one day and 7 days for one week. When you finish setup, press the ―Confirm‖
button to return ―Alarms‖ menu.
5. Copy one alarm output parameters to other alarm output: In the ―Alarms‖
menu, you can copy parameters of current alarm output to other alarm output.
6. Save setup: When you finish setup, in ―Alarms‖ menu, press the ―Confirm‖ button
to save.
Note: If any schedule is modified, you must reboot the DVR before it takes effect.
99