Securitytec DS-8004HCI-S User Manual page 93


If the bit rate (Max bit rate) is very low, and you select the ―Prerecord Time‖ as ―5
Seconds‖ the actual prerecord time is more than 5 seconds. On the other side, if
the bit rate is high, and the ―Prerecord Time‖ is set to ―30 Seconds,‖ the actual
prerecord time may be less than 30 Seconds.

PostRecord Time: This sets the length of time the DVR will continue to record in
alarm record mode after the alarm clears. When external alarm or motion alarm
ends the DVR will continue recording for a selected period of time. The options
are: 5 Seconds (default), 10 Seconds, 30 Seconds, 1 Minute, 2 Minutes, 5
Minutes and 10 Minutes.

Enable EventPara: This setting activates Event recording parameters. ―×‖ means
disable and ―‖ means enable.

Enable Rec: This setting determines whether the camera will record. Recording
may be halted based on additional schedule settings.

Schedule: When you enable recording function, you can setup recording
schedule.
Note: When the camera's recording schedule is modified, you must reboot the DVR
before the changes will take effect.
All day Recording Setup:
93