1. Manuals
  2. Brands
  3. Securitytec Manuals
  4. DVR
  5. DVRMP4
  6. User manual

Securitytec DVRMP4 User Manual

4 channel digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Thank you for purchasing our product.
Please read this User's Manual before
using the
product.
Change without Notice

4 Channel Digital Video Recorder

User's Manual
1

Advertisement

Table of Contents
loading

Related Manuals for Securitytec DVRMP4

Summary of Contents for Securitytec DVRMP4

  • Page 1: Channel Digital Video Recorder

    Thank you for purchasing our product. Please read this User’s Manual before using the product. Change without Notice 4 Channel Digital Video Recorder User’s Manual...

  • Page 2: Safety Precautions

    Safety Precautions CAUTION RISK OF ELECTRICAL SHOCK. DO NOT OPEN ! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of insulated dangerous Voltage within the product’s enclosure that may be sufficient magnitude to constitute risk of electrical shock to persons.
  • Page 3 About this document Before installing stand alone DVR, be sure to thoroughly review and follow the instructions in this Users Manual. Pay particular attention to the parts that are marked NOTICE. Also, when connecting with external application, first turn the power OFF and follow manual instruction for appropriate installation.
  • Page 4 FCC Statement: WARNING This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation." * Federal Communications Commission (FCC) Statement WARNING This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant...

  • Page 5: Table Of Contents

    Content Table Safety Precautions………………………………………………….……………………. Content Table……….…………………………………………………………………….. 4 1. Hardware…………………………………………………………………………………… 4 2. Unit Description of Front Panel………………………………………………………….. 5 3. Unit Description of Rear Panel…………………………………………………………… 6 4. Installation……………………..…………………………………………………………… 7 1. Procedure……..……………………………………………………………….… 7 2. Picture…………………………………………………………………………… 9 3. Playback………..………..……………………………………………………… 11 5. Function Setup…………………………………………………………….………………… 13 1.

  • Page 6: Unit Description Of Front Panel

    Unit Description of Front Panel 1 ~ 4 camera channel full screen choose button / 0 ~ 9 password input Quad screen display button Picture in picture button Picture 2x2 zoom in ZOOM Picture on picture button Picture Freeze FREEZE Channel auto sequence button AUTO Function menu button...

  • Page 7: Unit Description Of Rear Panel

    Unit Description of Rear Panel Power cord in DC 12V, power switcher Camera 1 ~ 4 input and 75 ohm high and low dips switch / Monitor out looping output Audio channel input x 4 and output x 2 RS 485 A + / B – Network connector.

  • Page 8: Installation

    Installation Procedure 1) Camera Connection Connect camera to the CAMERA INPUT located at rear side of the DVR. 2) Monitor Connection (Composite Connection Method) Connect monitor to the MONITOR output located at rear side of the DVR. 3) Sensor Connection Connect the Sensor to the SENSOR INPUT / OUTPUT at the Rear Panel of the DVR Relay output : COM+NC, COM+NO Alarm input : Short-circuit between Alarm1, Alarm2, Alarm3 or Alarm4 and GND is recognized as alarm.
  • Page 9 4) HDD internal connection Master x 1 Master x 1 / Slave x 1 Master x 1 / Slave x 1 CD-RW Master x 1 / Slave x 1 Master x 1 / Master x 1 CD-RW Master x 1 / Master x 1 Slave x 1 / Slave x 1 Slave x 1 / Slave x 1 Notice:...

  • Page 10: Picture

    5) Power Connection Connect the power to the POWER CONNECTION on the Rear Panel of the system, and turn on the switch. 6) Turn on the POWER. Make sure the adaptor is 12V 7) Detail setup in SYSTEM SETUP For detail setup, refer to the instruction of SYSTEM SETUP. Picture Full screen or quad screen display Press...
  • Page 11 4.) PIP (PICTURE IN PICTURE) 1.) Press (PIP) button. Press (AUTO) button to enable screen auto sequencing. Main picture Sub picture 2) With button, select the main channel screen, press button to select desired camera channel in small screen. 5.) Watch DOG DVR will auto reboot if operating system error detected, and then back to normal status.
  • Page 12 12.) BACKUP BACKUP SETUP PAGE 1.Device USB / CDRW *USB FORMAT 1. BACKUP DEVICE USB FROMAT 2. BACKUP FORMAT 2.Backup format: AVI or PES. 3. BACKUP CHANNEL □1 □2 □3 □4 3.Choose channel. v means this camera is selected. START: xxxx/xx/xx xx:xx:xx START / END: Backup time range END: xxxx/xx/xx xx:xx:xx START BACKUP...

  • Page 13: Playback

    Playback rewind 1. Playback Mode Press (PLAY) button to begin playback. (System will playback the previous time recording.) 2. T-SRH mode PLAY SETUP PAGE 1) T-SRH: Playback by time list search. EVENT LIST Press T-SRH button to activate playback function. TIME LIST Press direction button FIRST: xxxx/xx/xx xx:xx:xx...
  • Page 14 3) TIME LIST (Playback image by Time-Search): Recorded images list (by hours) TIME SEARCH LIST PAGE FIRST: xxxx/xx/xx xx:xx:xx (The FIRST date and time recording display). LAST: xxxx/xx/xx xx:xx:xx (The final date and time recording display). GOTO: xxxx/xx/xx xx:xx:xx (year / month / day, Hour / Minute / Second) Press direction button Left/Right to change date and time values position.

  • Page 15: Function Setup

    FUNCTION SETUP LOGIN 1) Press (MENU) button to enter OSD menu. You could do the system function setup in MENU. 2) Password enter window pop-up: 1. Default password (Account-Admin): 00000 LOGIN DVR SYSTEM 2. Default password (Account-User): 11111 3. Default password (Account-User): 22222 PASSWORD xxxxx 4.
  • Page 16 Press MENU button to enter MAIN SETUP PAGE. OSD Operation MAIN SETUP PAGE 1. HDD INFORMATION 2. DATE-TIME SETUP 3. DISPLAY SETUP 4. CAMERA SETUP 5. BUZZER&RELAY SETUP 6. SYSTEM SETUP 7. PTZ SETUP 8. ADVANCED SETUP 1) Use direction button up/down button to select setup item.
  • Page 17 1. HDD INFORMATION MAIN SETUP PAGE NO. SIZE USED BRAND 1. HDD INFORMATION 080GB OW SAEGATE 2. DATE-TIME SETUP 3. DISPLAY SETUP 4. CAMERA SETUP STATUS: USE 5. BUZZER&RELAY SETUP START: xxxx(Y)/xx(M)/xx(D) xx:xx:xx(H:M:S) 6. SYSTEM SETUP END: xxxx(Y)/xx(M)/xx(D) xx:xx:xx(H:M:S) 7. PTZ SETUP 8.
  • Page 18 2. DATE-TIME SETUP MAIN SETUP PAGE DATE-TIME SETUP PAGE 1. HDD INFORMATION 1. HOUR TYPE: 2. DATE-TIME SETUP 2. DATE TYPE 3. DISPLAY SETUP 3. DATE 2006 / 01 / 01 4. CAMERA SETUP 4. TIME 5. BUZZER&RELAY SETUP 5. DATE-TIME POSITION SETUP 6.
  • Page 19 3. DISPLAY SETUP MAIN SETUP PAGE DISPLAY SETUP PAGE 1. HDD INFORMATION 1. DATE-TIME 2. DATE-TIME SETUP 2. CAMERA TITLE 3. PB DATE-TIME 3. DISPLAY SETUP 4. CAMERA SETUP 4. PB CAMERA TITLE 5. BUZZER&RELAY SETUP 5. DVR STATUS 6. SYSTEM SETUP 6.
  • Page 20 4. CAMERA SETUP MAIN SETUP PAGE CAMERA SETUP PAGE 1. HDD INFORMATION 1. COLOR SETUP 2. DATE-TIME SETUP 2. TITLE SETUP 3. DISPLAY SETUP 3. MARK&MIRROR SETUP 4. CAMERA SETUP 5. BUZZER&RELAY SETUP MENU, ESC: EXIT, ENTER: RUN 6. SYSTEM SETUP 7.
  • Page 21 (2.) TITLE SETUP: Camera title setup function allows 9 characters for each channel CAMERA TITLE SETUP PAGE CH1 (CAMERA 01 ) CAMERA SETUP CH2 (CAMERA 02 ) 1. COLOR SETUP CH3 (CAMERA 03 ) 2. TITLE SETUP CH4 (CAMERA 04 ) 3.
  • Page 22 3.)MASK&MIRROR SETUP MASK&MIRROR SETUP PAGE **MASK FUNCTION CAMERA SETUP 1. CH 1: OFF 1. COLOR SETUP 2. CH 2: OFF 3. CH 3: OFF 2. TITLE SETUP 4. CH 4: OFF 3. MARK&MIRROR SETUP **MIRROR FUNCTION OFF 1. CH 1: OFF 2.
  • Page 23 5. BUZZER&RELAY SETUP BUZZER&RELAY SETUP PAGE MAIN SETUP PAGE BUTTON TONE 1. HDD INFORMATION **SYSTEM BUZZER 2. DATE-TIME SETUP 1. ALARM BUZZER 3. DISPLAY SETUP 2. MOTION BUZZER 4. CAMERA SETUP 3. VLOSS BUZZER 5. BUZZER&RELAY SETUP **SYSTEM RELAY N.O. 6.
  • Page 24 6. SYSTEM SETUP MAIN SETUP PAGE SYSTEM SETUP PAGE 1. HDD INFORMATION 1. DWELL INTERVAL 010SEC 2. DATE-TIME SETUP 2. LANGUAGE ENGLISH 3. DISPLAY SETUP 3. RS-485 ID 4. CAMERA SETUP 4. RS-485 BAUDRATE 9600 5. BUZZER&RELAY SETUP 5. LIVE AUDIO 6.
  • Page 25 7. PTZ SETUP MAIN SETUP PAGE PTZ SETUP PAGE 1. HDD INFORMATION **PROTOCOL P-TYPE 2. DATE-TIME SETUP **BAUDRATE 2400 3. DISPLAY SETUP **CHANNEL NUMBER CH01 4. CAMERA SETUP PTZ NUMBER 5. BUZZER&RELAY SETUP LINE SCAN 6. SYSTEM SETUP ALARM ALARM ID 7.
  • Page 26 8. ADVANCED SETUP ADVANCED SETUP PAGE MAIN SETUP PAGE 1. ALARM SETUP 1. HDD INFORMATION 2. MOTION SETUP 2. DATE-TIME SETUP 3. RECORD SETUP 3. DISPLAY SETUP 4. EVENT RECORD SETUP 4. CAMERA SETUP 5. PASSWORD SETUP 5. BUZZER&RELAY SETUP 6.
  • Page 27 2. MOTION SETUP ADVANCED SETUP PAGE MOTION SETUP PAGE 1. ALARM SETUP **MOTION FUNCTION ON **CHANNEL NUMBER CH01 2. MOTION SETUP 3. RECORD SETUP 1. FRAME NUMBER 03 4. EVENT RECORD 2. SENSITIVITY 5. PASSWORD SETUP 3. MOTION ACTIVE 6. NETWORK SETUP 4.
  • Page 28 > MOTION AREA SETUP < (Press LOCK button for help) ****CH01 AREA MASK**** Press 1/2/3/4 numeric to select channel. : WALK ON MODE Press value change button to change mode. 1.2.3.4: SELECT CHANNEL : MOVE CURSOR Press direction button to move cursor. Press ENTER button to on mask function or off.
  • Page 29 3. RECORD SETUP RECORD SETUP PAGE ADVANCED SETUP PAGE 1. RECORD TYPE FIELD 1. ALARM SETUP 2. HDD FULL OVERWRITE 2. MOTION SETUP 3. RECORD SCHEDULE 4. RECORD START 3. RECORD SETUP 4. EVENT RECORD 5. RESOLUTION 5. PASSWORD SETUP 6.
  • Page 30 >SCHEDULE SETUP< RECORD SETUP 1. RECORD TYPE FIELD Press direction buttons to choose 2. HDD FULL OVERWRITE SCHEDULE items. 3. RECORD SCHEDULE 4. RECORD START Press values change button to increase or reduce 5. RESOLUTION 6. AUDIO RECORD 7. SCHEDULE SETUP 8.
  • Page 31 30MIN SCHEDULE SETUP CURSOR STEP 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00 00:30 01:30 02:30 03:30 04:30 05:30 06:30 07:30 08:30 09:30 10:30 11:30 12:30 13:30 14:30 15:30 16:30 17:30 18:30 19:30 20:30 21:30 22:30 23:30 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09:00 10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00...
  • Page 32 >RECORD SPEED SETUP< RECORD SETUP 1. RECORD TYPE FIELD RECORD SPEED SETUP PAGE 2. HDD FULL OVERWRITE TOTAL SPEED: FULL / HALF / 20 fps / 10 fps / 4 fps 3. RECORD SCHEDULE CH 01: ON 4. RECORD START CH 02: ON 5.
  • Page 33 4. EVENT RECORD ADVANCED SETUP PAGE EVENT RECORD SETUP PAGE 1. ALARM SETUP 1. EVENT MOTION 2. MOTION SETUP 2. EVENT ALARM 3. RECORD SETUP 3. EVENT DURATION 0 10 SEC 4. EVENT RECORD 4. RECORD SPEED FULL 5. PASSWORD SETUP 5.
  • Page 34 5. PASSWORD SETUP ADVANCED SETUP PAGE 1. ALARM SETUP PASSWORD SETUP PAGE 2. MOTION SETUP 1. PASSWORD AUTH 3. RECORD SETUP 2. REMOTE CONTROL 4. EVENT RECORD 3. ADMIN (00000) 4. USER1 (11111) 5. PASSWORD SETUP 6. NETWORK SETUP 5. USER2 (22222) 7.
  • Page 35 6. NETWORK SETUP ADVANCED SETUP PAGE STATIC IP SETUP PAGE 1. ALARM SETUP 1.NETWORK FUNCTION 2. MOTION SETUP 2. SMTP SETUP 3. RECORD SETUP 3. PORT 4. EVENT RECORD 4. TYPE STATIC IP CON 5. PASSWORD SETUP IP: xxx.xxx.xxx.xxx MASK: xxx.xxx.xxx.xxx 6.
  • Page 36 7. HDD FORMAT ADVANCED SETUP PAGE 1. ALARM SETUP Press direction buttons UP / DOWN to 2. MOTION SETUP HDD FORMAT items position. 3. RECORD SETUP Press ENTER to format all HDD. 4. EVENT RECORD 5. EVENT Caution: User can format HDD only when 6.
  • Page 37 8. FACTORY DEFAULT ADVANCED SETUP PAGE 1. ALARM SETUP 2. MOTION SETUP Press direction buttons UP / DOWN to 3. RECORD SETUP FACTORY DEFAULT items position. 4. EVENT RECORD Press ENTER to restore. 5. EVENT 6. PASSWORD SETUP 7. HDD FORMAT 8.

  • Page 38: Specifications

    Specification and configuration 4 CH DVR Model NTSC / PAL Auto Detection Video I/F Input 4 CH inputs 1.0Vp-p, 75ohm unbalanced (BNC Type) Output Main monitor Composite (BNC), 4 looping output (BNC) S/N Ratio More than 40dB Color 6.7 Million Monitoring Method Display Screen 1, 4 CH, PIP, 2 x Zoom, Freeze...
  • Page 39 Mechanical IR Remote Controller Standard JOG Shuttle Power Supply DC 12V / 5 A if hard disk x 2 installed DC 12V / 8.33 A if hard disk x 3 or x 4 installed Weight N.W.:7.3 kg Dimension 430 (W) x 360 (D) x 72.6 (H) mm Operating Temperature 41°...
  • Page 40 DVR control PTZ dome (User needs to login if password protection is on) KAY 0 : To PTZ control mode. KEY 1 ~ 4 : Select camera. KEY 5: Exit preset function. KEY6 ~ KEY 9 / (Preset 1 ~ Preset 4): To preset position then preset setup mode on. (4 Preset setup support.) KEY QUAD: Set the preset position.
  • Page 41 (Approximate Time Table) Record Time Table: 80 GB HD Record Quality: Low Full Half Hours 163 hr 243 hr 280 hr 379 hr 520 hr Record Quality: Normal Full Half Hours 194 hr 253 hr 357 hr 506 hr Record Quality: Fine Full Half Hours...
  • Page 42 Network and USB data read 1. In CD ROM, double click setup.exe to access software installation. 2. Suggest computer system up to PIV 2.0 GHz , RAM up to 256 MB , VGA card up to 64M. Windows XP / 2000. 3.
  • Page 43 FUNCTION BUTTON: Click Live to view image. 1. Live: to live mode. REC: live record button. 2. Download: to playback mode. Setting: record path setup button. 3. File Play: to file play mode. Capture: image capture button (.bmp). 4. PTZ: to PTZ dome mode Event: event list.
  • Page 44 Download: press download to playback mode. DVR REC Start: DVR record start time. DVR REC End: DVR record end time. Start: choose playback start time. End: choose playback end time. ** Last one minute display.** CH 1 ~ CH 4: choose camera. Press Count button to calculate data size.
  • Page 45 After data count, press OK to start playback. Playback data auto save to REC path.
  • Page 46 Record path setup: .ps file saved. REC: press REC button to record live image.
  • Page 47 Capture: Capture image file to .bmp saved. Only live and file play acceptable. Press Setting to DVR function setup: 1. SYSTEM 2. REC 3. ALARM / MOTION. 1. System...
  • Page 48 2. REC 3. ALARM / MOTION...
  • Page 49 Event: Event list playback. Only alarm and motion playback. Choose event time, click OK to start playback.
  • Page 50 Press File Play to data backup play mode. Click Open to choose file. Choose path and file name and then ready to play mode.

  • Page 51: Ptz Control

    Press Play to start back up data playback mode. For the setting details please refer to the remark on page 25 / 40 of the P/T/Z dome mode. Click PTZ button to control mode, and then select channel 1 ~ channel 4 which is corresponding to PTZ dome PTZ Control function: Click the left button of mouse on direction arrowhead, on each click, the PTZ dome will move 16 +/- 4 degree.
  • Page 52 Memo...

Table of Contents