Video Parameter Setup - Securitytec DS-8004HCI-S User Manual

1. If you do not want to display the camera name, disable the check box beside
camera name edit box. The disable flag is ―×‖. If you enable the check box, you
can setup the camera name position. You can copy the position to any other
camera. The setup steps are:
2. Enable the check box on the right side of camera name, then move the ―Active
Window‖ to the ―Position‖ button and press [ENTER] to enter the camera name
position setup interface.
3. Use the [] [] [] [] keys to move camera name position. Press [ENTER] to
return the ―Image Setup‖ menu. Press ―Confirm‖ to save the settings, or ―Cancel‖
or [ESC] to abort.

6.5.2 Video Parameter Setup

This feature allows you to make changes to the visual display of individual cameras. You
can adjust the brightness, saturation, contrast and hue. You can setup the camera
individually and you can copy the video parameters of one camera to any other cameras.
Here are the setup steps:
1. Enter the ―Camera Input Adjustment‖ menu and select camera (use the [] []
keys to select a camera).
2. Select the ―Adjust‖ button for each parameter; Brightness, Contrast, Saturation
and Hue. Press the [ENTER] key to access the parameter overlaid on an image of
the selected camera. Use the [] [] keys to adjust as you watch the image
change. When you are satisfied with the results, press [ENTER] to return ―Image
Setup‖ menu.
79