Securitytec DS-8004HCI-S User Manual page 64

Screen Setup Options:
1. Select Out: Use ―Select Out‖ to select the main or Spot outputs:
2. Preview Mode (Live view mode): Use the [↑] [↓] keys to select the desired
screen configuration for edit. The menu allows you to select screen formats and
insert camera numbers as desired. The number of available formats depends on
the number of camera inputs available (1, 4, 9, 12 and 16 displays are available in
16 channel units) See ―Layout‖ below for setup details.
3. Switch Time: This control sets the sequence dwell time in the sequence mode.
Each sequencing view will remain on the screen for the amount of time selected.
Options include 5, 10, 20, 30 seconds, 1, 2, 5 minutes and never (sequence off).
For example: With a 16 channel DVR, if you select ―4 Screen‖ mode and a ―20
Second switch time. The DVR display will change four camera displays every 20
seconds (1-4, 5-8, 9-12, and 13-16).
4. Audio preview: If you enable audio (―‖), when you view a single camera the
DVR will play the audio associated with that channel.
5. Layout: The menu provides a window divided into sections. The window sections
correspond to the screen format selected (1, 4, 9, 12 and 16). Each individual
section represents one camera. You can move the ―Active Window‖ to each
section. Use the camera selection bar to insert the appropriate camera in the
desired cameo. For example: Select the 16 camera mode (16- screen in the mode
selection). Move the ―Active Window‖ to one of the segments and press the [Enter]
(or [EDIT]) key to enter into the ―Edit‖ mode. Press numeric keys to input a camera
for that section of the multi-screen display (‖0‖ ―1‖ for camera #1 on 16 channel
units – ―1‖ for camera #1 on units with less than ten channels). The camera
number will display in the window. You can arrange the display in any camera
order. If you press 0 or 00, the corresponding window will not display live video.
64