8.3.2 Use DVR FTP Upgrade Function
Upgrading using FTP: You need a host PC running FTP server software with access to
the upgrade firmware file (digicap). Make sure DVR and PC are in the same sub net.
1. In the ―Utilities‖ Menu select ―Upgrade.‖
2. Input the FTP server IP address and press [ENTER].
Upgrading as following:
Note: Do not attempt any other tasks until the upload completes.
8.3.3 Use RS-232 Serial Command
Connect the DVR RS-232 port and PC com port using a null modem cable.
Run Hyper Terminal:
Setup and run HyperTerminal:
127