Cruise (Pattern) Setup - Securitytec DS-8004HCI-S User Manual

6.14.6

Cruise (Pattern) Setup:

Cruise (often referred to as pattern) ―remembers‖ a pre-selected series of camera
movements. This series of dome movements will take place when the Cruise/pattern
number is selected.
1. In ―PTZ‖ menu, select the ―Setup‖ button to the right of ―Cruise.‖ This will activate
the Cruise setup menu.
2. Select ―RecCru‖ to enter the ―PTZ control‖ interface. You can control the PTZ with
the direction keys. Press [ENTER] to save the operation track and return to the
―Cruise‖ setup menu. Press ―StartCru‖ button to repeat the PTZ track until you
press ―Stop‖ button.
3. Select ―Return‖ to return to the ―PTZ‖ menu. In ―PTZ‖ menu, press ―Confirm‖ to
save the Pattern/cruise.
Please make sure the PTZ you are using can support the cruise (pattern) function.
110