Table of Contents
Advertisement
6.13.2
DHCP Function
Selecting DHCP:
1. Enter ―Network‖.
2. Set the IP Address as ―0.0.0.0.‖
3. Select ―Confirm‖ to save.
4. Reboot the DVR. During reboot, the DVR will look for a DHCP server and obtain a
dynamic IP address. The IP number assigned will display in the menu.
6.13.3
PPPoE Function
Enter the DVR ―Network‖ menu:
Enable "PPPoE" option:
1. Input PPPoE username which is from ISP
2. Input PPPoE password which is from ISP
3. Input PPPoE password again to verify.
4. Save parameters. In ―PPPoE‖ menu, press ―Confirm‖ to save the parameters and
return to the Network menu. Press ―Confirm‖ again in ―Network‖ menu. The DVR
must reboot before the parameters take effect. In reboot process, DVR will start
dialup using PPPoE parameters. If DVR dialup to the internet is successful, the
DVR will display the dynamic internet IP address in the Network menu.
103
Advertisement
Table of Contents
