Securitytec DS-8004HCI-S User Manual page 84

7. Alarm schedule setup: When there is a view tampering alarm present, the DVR
will handle the alarm based on the schedule selected. You can set 4 periods for each
day of the week. You can copy the schedule of one day to other days.
Note: Time periods may not overlap. You must reboot the DVR before the settings take
effect.
8. Setup alarm policy: If a view tampering alarm occurs while the schedule is active
the DVR will respond based on the policy Selected. You can select one or more of the
following: ―On Screen Warning‖, ―Audible tone‖, ―Upload to Center‖, ―Trigger Alarm
Output‖ and ―Send E-mail‖. Use the [] [] and [EDIT] key to enable or disable
selections. ―×‖ is disable and ―‖ is enable.
9. Save alarm setup: After selecting the setup parameters, press ―Confirm‖ to
return ―Camera Input Adjustment ‖ menu. In the ―Camera Input Adjustment‖ menu
press ―Confirm‖ to save the setup and return to the main menu, or ―Cancel‖ or [Esc] to
abort.
10. Save all cameras: If you want to setup additional cameras, repeat steps two
through eight. In ―Image Setup‖ menu, press ―Confirm‖ to save all cameras
parameters. Press ―Cancel‖ key or [ESC] key to abort.
84