Main And Spot Output Playback; Main And Spot Output To Control Ptz - Securitytec DS-8004HCI-S User Manual

6. Alarm/Aux Out: This configures the monitor that will switch to full screen on alarm.
7. Save the setup selections: Select ―Confirm‖ to save the viewing configuration.
Press ―Cancel‖ or [ESC] to abort.
5.3

Main and Spot Output Playback

Both the ―Main‖ and ―Spot‖ display can be used to playback the recorded files on the DVR
HDD. Press the [Main/Aux] key to enter into ―Main‖ or ―Spot‖ control mode, and press the
[PLAY] key to enter into ―Playback‖ menu.
5.4

Main and Spot Output to Control PTZ

Press the Main and the Spot output may be used to perform PTZ control.
1. Press the [Main/Aux] key to select the desired output.
2. Press the [PTZ] key to enter the PTZ control mode.
Note: The [Main/Aux] key is not active while in the PTZ mode. Press the [ESC] key to exit
PTZ control mode in order to change monitor control modes.
65