Securitytec DS-8004HCI-S User Manual page 88

Note: Press [A] key to clear all motion areas.
The keys used to setup motion areas are as follows:

[↑] [↓] [←] [→]: Move yellow pane to any position.

[EDIT]: Yellow - panel (position) changes to red (adjust panel size).

[→]: Right enlarge red pane;

[←]: Left shrink red pane;

[↓]: Down enlarge red pane;

[↑]: Up shrink red pane;

[PTZ]: Set whole screen as motion area;

[A]: Clear all motion areas;

[ENTER]: Save and return to ―Image Setup‖ menu;

[ESC]: Cancel setup and return to ―Image Setup‖ menu;
Motion Alarm Policy: This feature allows you to configure multiple alarm responses
based on a single alarm input.
1. In the ―Camera Input Adjustment‖ menu, move the ―Active Window‖ to the ―Policy‖
button to the far right of ―Motion Det. Level‖ and press [ENTER] to access the
―Motion Alarm Handle‖ menu:
88