Motion Detection Alarm - Securitytec DS-8004HCI-S User Manual

5. Setup alarm policy: You can select one or more response: ―On Screen Warning‖,
―Audible tone‖, ―Upload to Center‖ and ―Trigger Alarm Output‖. Use the [] [] and
[EDIT] key to enable or disable items. ―×‖ is disable and ―‖ is enable.
6. Save alarm setup: After making selections, press ―Confirm‖ to return to the ―Camera
Input adjustment‖ menu. In this menu, press ―Confirm‖ to save current
Camera parameters and return main menu.
7. Save all cameras: If you want to setup other cameras, please repeat steps two
through six. In ―Image Setup‖ menu, press ―Confirm‖ to save all cameras parameters,
or [ESC] to abort.
6.9

Motion Detection Alarm

This feature generates an alarm when video motion is detected in a camera views.
Setting Up Motion Detection:
1. Enter the ―Camera Input Adjustment‖ menu:
2. Select camera: Use [] [] to select one camera.
3. Select motion detection sensitivity: There is a selection button to the right of
―Motion Det. Level‖ that selects the motion detection sensitivity. There are 7
options from 0 (the lowest) to 5 (the highest) and ―Off‖. Use the [] [] keys to
make a selection. In the ―Off‖ option the DVR will not response to motion detection.
If you select other options the ―Motion Area Setup‖ and ―Policy Setup‖ buttons will
86