Ptz Control - Securitytec DS-8004HCI-S User Manual

4.4

PTZ Control

Note: Ensure that PTZ communication parameters have been configured properly before
attempting normal operation. Your password must have PTZ control enabled in order to
control cameras.
Note: Please refer to ―PTZ Setup‖ in section 6.14.
Entering the PTZ control interface:
In live mode, press the [PTZ] key. In the login dialog, select a user name and input the
correct password. In menu mode, press the [PTZ] key and you will enter the PTZ control
interface directly.
There is a ―PTZ Control‖ prompt in the PTZ control interface. The displayed camera name
indicates the camera under control. For example, ―Camera 01‖ means you are controlling
PTZ camera #1.
Select the desired channel:
In the PTZ control mode, you can press the numeric keys to select the desired channel
(Ex: ―0,‖‖1,‖ for camera #1 – or ―1‖ if using a 4/8 channel unit).
After you select the camera PTZ, you can use the shortcut keys to control the PTZ.
48