Securitytec DS-8004HCI-S User Manual page 106

PTZ menu Options:

Select channel: Select a PTZ camera.

RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control, etc.
These parameters must be the same as those required by the PTZ protocol.

PTZ address: Each PTZ has a different address.

PTZ type: The DVR has the following PTZ protocols: YouLi, LinLin-1016,
LinLin-820, Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D,
VCOM VC-2000, NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX,
TLPelco-p, TLHHX-2000, BBV, RM110, KC3360S, ACES, ALSON, INV3609HD,
Howell, Tc Pelco P, Tc Pelco D, AUTO-M, AUTO-H, ANTEN, CHANGLIN,
DeltaDome, XYM-12, ADR8060, EVI-D30, DEMO-SPEED, DM-PELCO-D, ST832,
LC-D2104, HUNTER, A01, TECHYIN, WEIHAN, LG, D-MAX, Panasonic,
KTD-348, infinova, PIH-7625, LCU, DennarDome, VICON,TKC676,YAAN_NEW，
DL_NVS_1Z,i3DVR etc. Other PTZ protocols will be added with the new firmware.
Note: If you select Pelco-P protocol set the dome address one number higher than the
DVR setting. For example, if camera ID is 2, the DVR PTZ address is set as ID 3.
The DVR when you change PTZ parameters.
106