Securitytec DS-8004HCI-S User Manual page 112

Network.
In the ―RS232‖ menu; select ―PPP‖ to enable the PPP setup function.
Setup PPP parameter.
PPP Options:

PPP Mode: There are two options: ―Active‖ and ‖Passive‖. ―Active‖ means the
DVR will dialup through PSTN. The ―Active‖ function is not available yet. ―Passive‖
means DVR will wait for dialup.

Callback mode: Only used in ―PPP‖ mode. There are two options: ―By Dialer‖
and ―Preset Tel'. This function is not currently available.

Remote IP: Only used in ―PPP‖ mode. This IP is defined for the remote PC that
will connect to the DVR through PSTN.
112