Securitytec DS-8004HCI-S User Manual page 98

parameters.
PTZ Linkage:
1. Select the ―PTZ Linkage‖ button to access the ―PTZ Linkage‖ setup menu:
2. Select a camera and then select one of following PTZ linkage options:

Preset: Set the flag as ―‖ to enable preset and enter the preset number in the
presser selection box. Please refer to chapter 6.14 for preset setup.

Sequence: Set the flag as ―‖ to enable sequence and input the sequence
number. Please refer to chapter 6.14 for sequence setup.

Cruise (Pattern): Set the flag as ―‖ to enable cruise (pattern). Please refer to
chapter 6.14 for cruise (pattern) setup.
3. Press the ―Confirm‖ button to save and return to the ―Alarms‖ menu. Press
―Cancel‖ to abort and return ―Alarms‖ menu.
Note: Please make sure that the PTZ you are using can support preset, sequence and
cruise (pattern) functions. Also make sure that you configure them in the PTZ menu. One
external alarm input can trigger multiple PTZ links.
4. Copy the parameters: You can copy the parameters of current alarm input to
other external input.
5. Save setup: In ―Alarms‖ menu, press ―Confirm‖ button to save the parameters.
Press ―Cancel‖ button or [ESC] to abort.
98