Securitytec DS-8004HCI-S User Manual page 114

ATQ1 ---- Commit instruction and not display
AT&W&W1 ---- Save parameters

Use a DCE cable to connect the Modem to DVR RS232 port.
Setup at PC end

Setup the Modem used on PC side. Use a DCE cable to connect the Modem to
the PC serial port. You can use HyperTerminal or NetTerm to setup the modem:
AT&F ---- Restore default parameters (Generally, Modem is hard flow control)
AT&W&W1 ---- Save parameters

Open ―Network and Dial-up Connections‖ in control panel, then press ―New
Connection...‖, select ―Dial-up to private network‖ according to the guide. Select
the corresponding modem. Input the telephone number to be dialed in the next
step. finish it according to the instructions. At this time, you will find a new program
named ―Dial-up Connection‖ in ―Network and Dial-up Connections‖ folder.
Setup:

Open the properties of the newly established dialup program, select ―Advanced‖
(custom settings) in the security option, press setup. Setup the popup dialogue
box (Advanced Security Settings) as follows:
114